Other Functions - Mitsubishi Electric Mr.SLIM PCY-P18KA Operation Manual

6. Timer
6.2. For Wireless Remote-controller

7. Other Functions

7.1. Locking the Remote Controller Buttons (Opera-
tion function limit controller)
If you wish, you can lock the remote controller buttons. You can use
the Function Selection of remote controller to select which type of lock
to use.
(For information about selecting the lock type, see section 8, item [2]
(1)). Specifi cally, you can use either of the following two lock types.
1 Lock All Buttons:
Locks all of the buttons on the remote controller.
2 Lock All Except ON/OFF:
Locks all buttons other than the ON/OFF button.
Note:
The "Locked" indicator appears on the screen to indicate that buttons are
currently locked.
TIME SUN
˚C
TEMP.
MENU ON/OFF
BACK MONITOR/SET DAY
PAR-21MAA CLOCK
10
1
Lock Indicator
FUNCTION
˚C
ON/OFF
FILTER
CHECK TEST
OPERATION
CLEAR
1 Press the or button (TIMER SET).
AUTO STOP
AUTO START
• Time can be set while the following symbol is blinking.
OFF timer : A is blinking.
ON timer : A is blinking.
h min
2 Use the and buttons to set the desired time.
3 Canceling the timer.
To cancel the OFF timer, press the
To cancel the ON timer, press the
• It is possible to combine both OFF and ON timers.
• Pressing the ON/OFF button of the remote controller during timer
mode to stop the unit will cancel the timers.
• If the current time has not been set, the timer operation cannot be
used.
<How to Lock the Buttons>
1. While holding down the Filter button 4, press and hold down the ON/
OFF button 1 for 2 seconds. The "Locked" indication appears on the
screen (at 1), indicating that the lock is now engaged.
* If locking has been disabled in Function Selection of remote control-
ler, the screen will display the "Not Available" message when you
press the buttons as described above.
˚C
• If you press a locked button, the "Locked" indication (at 1) will blink
on the display.
˚C
<How to Unlock the Buttons>
1. While holding down the Filter button 4, press and hold down the ON/
OFF button 1 for 2 seconds—so that the "Locked" indication disap-
pears from the screen (at 1).
˚C
AUTO STOP
button.
button.
AUTO START
1
FUNCTION
˚C
1
FUNCTION
˚C
1
˚C