Other Functions - Mitsubishi Electric Mr.Slim PEAD-RP50JAQ Operation Manual

6. Timer
<Checking the Current Auto Off Timer Setting>
4
TIMER
AFTER
1. Be sure that the "Auto Off" is visible on the screen (at 1).
2. Hold down the Timer Menu button B for 3 seconds, so that "Monitor" is
indicated on the screen (at 4).
• The timer remaining to shutdown appears at 5.
3. To close the monitor and return to the standard control screen, press the
Mode (Return) button 2.
<To Turn Off the Auto Off Timer...>
● Hold down the Timer On/Off button 9 for 3 seconds, so that "Timer Off"
appears (at 6) and the timer value (at 7) disappears.
˚C
6
● Alternatively, turn off the air conditioner itself. The timer value (at 7) will
disappear from the screen.
<To Turn On the Auto Off Timer...>
● Hold down the Timer On/Off button 9 for 3 seconds. The "Timer Off"
indication disappears (at 6), and the timer setting comes on the display
(at 7).
● Alternatively, turn on the air conditioner. The timer value will appear at 7.
6

7. Other Functions

7.1. Locking the Remote Controller Buttons (Operation
function limit controller)
■ If you wish, you can lock the remote controller buttons. You can use the
Function Selection of remote controller to select which type of lock to use.
(For information about selecting the lock type, see section 8, item [4]–2
(1)).
Specifically, you can use either of the following two lock types.
1Lock All Buttons:
Locks all of the buttons on the remote controller.
2Lock All Except ON/OFF:
Locks all buttons other than the ON/OFF button.
Note:
The "Locked" indicator appears on the screen to indicate that buttons are cur-
rently locked.
TIME SUN
˚C
TEMP.
MENU ON/OFF
BACK MONITOR/SET DAY
PAR-21MAA CLOCK
10
5
Timer Setting
OFF
1
AUTO OFF
7
˚C
AUTO OFF
7
AUTO OFF
7
AFTER OFF
˚C
˚C
AUTO OFF
1
Lock Indicator
FUNCTION
˚C
ON/OFF
1
FILTER
4
CHECK TEST
OPERATION CLEAR
6.2. For wireless remote controller (option)
ON/OFF
FAN
MODE VANE
CHECK LOUVER
TEST RUN
SET RESET
AAA
AAA
1) Set the current time
1 Press the CLOCK button using a thin stick and blink the time A.
h min
2 Press the and button to set the current time.
3 Press the CLOCK button using a thin stick.
2) Set the time to start the unit as follows
1 Press the AUTO START button.
• Time can be set while the following symbol is blinking.
On time: B START is blinking.
• The start times is displayed at A.
h min
2 Use the and buttons to set the desired time.
3 To cancel the ON timer, press the
3) Set the time to stop the unit as follows
1 Press the
AUTO STOP button.
• Time can be set while the following symbol is blinking.
Off time: C STOP is blinking.
• The stop times is displayed at D.
h min
2 Use the
and buttons to set the desired time.
3 To cancel the OFF timer, press the
4) Changing the set times
AUTO START AUTO STOP
Press the or to cancel the timer and repeat from 2) or 3).
<How to Lock the Buttons>
1. While holding down the Filter button 4, press and hold down the ON/OFF
button 1 for 2 seconds. The "Locked" indication appears on the screen
(at 1), indicating that the lock is now engaged.
* If locking has been disabled in Function Selection of remote controller,
the screen will display the "Not Available" message when you press the
buttons as described above.
˚C
• If you press a locked button, the "Locked" indication (at 1) will blink
on the display.
˚C
<How to Unlock the Buttons>
1. While holding down the Filter button 4, press and hold down the ON/OFF
button 1 for 2 seconds—so that the "Locked" indication disappears from
the screen (at 1).
˚C
C
D
B
A
TEMP
AUTO STOP
13
AUTO START
h
2
min
CLOCK
AUTO START
button.
AUTO STOP
button.
1
FUNCTION
˚C
1
FUNCTION
˚C
1
˚C