Customer Responsibilities; Responsibilities Of The Purchaser/Customer - GE Optima IGS 320 Preinstallation Manual

2 Customer Responsibilities

2.1 Responsibilities of the Purchaser/Customer

To ensure that the installation of an Optima System meets the purchaser or customer
expectations, it is important to determine who will take responsibility for the various items during
the system installation process. To help you in determining these responsibilities, review the
following checklists with the customer and assign responsibilities as appropriate:
•
Tool and Test Equipment
•
Pre–Installation Checklist
Contract Changes:
Be sure to inform the customer that the cost of any alteration or modification not specified in the
sales contract are liable to the customer.
The following GE-supplied equipment must be installed by the Hospital's Contractors, per room
drawings:
•
PDB (Electrical Power Distribution Box or Main Disconnect Panel)
• LC Gantry & Table baseplate hole drilling (Per supplied template)
•
LCD Monitor suspension stationary rails
•
LC Gantry baseplate grout
•
LC Gantry baseplate
•
Omega common baseplate (if applicable)
Chapter 1 General Requirements
Optima IGS 320, Optima IGS 330 Pre-Installation Manual
(Tools and Test Equipment)
(Pre-Installation Checklist)
Direction 5537562-1-1EN, Revision 3
23