Product Features - universalblue MORGET 6042W User Manual

ENGLISH
agent or similarly qualified
persons in order to avoid a
hazard.
If the fan is not working
•
properly, contact a qualified
technician for examination
and repair. Never attempt to
dismantle the fan yourself.
To avoid personal injury or
•
damage to the fan and other
items, be
working around or cleaning
the fan.
Do not use abrasive cleaners,
•
water or detergent when
cleaning
blades. A dry dust cloth or
lightly dampened cloth will
be suitable for most cleaning.
Due to the natural motion of
•
the fan, some connections
may become loose. Check the
connections at least twice
a year, and if they are loose,
tighten them.
To uninstall the product, it is
•
recommended to contact a
qualified electrician.
NOTE: The important safety
•
precautions and instructions
appearing in the manual
are not meant to cover all
possible
situations that may occur.
It must be understood that
common sense and caution
are necessary factors in the
installation and operation of
32
cautious when
the fan or
conditions
this fan

PRODUCT FEATURES

The package contains the following items,
besides this manual and the product
warranty. See pictures 01 on page 4.
Note: The picture is for reference only. The
content may vary depending on the model.
1. Receiver support
2. Top cover
3. Downrod
4. Bottom cover
5. Fan body (motor)
6. Blades bracket and Blades (x5)
7. LED Light kit
8. Glass lamp cover
9. Remote control and receiver
10. Blade balance kit, and assembly and
fan
installation screws and washers.
You can check the product features in table
01 on page 12.
ASSEMBLY AND INSTALLATION
Before unpacking the product, memorize
the position of each accessory in case you
need to repack it in the future.
If you notice any type of damage or
malfunctioning, get in touch with the seller
• The manufacturer will not be held
accountable for any damage caused by
an incorrect installation.
• Remove all protective sheets and
adhesive tape before using it for the
first time.
• Put all the product parts on a soft
surface, for example a carpet, or help
and
yourself with the packaging, to prevent
dents or scratches.
.
Before installing the appliance,
make sure that the appliance
is unplugged from the mains.
Also disconnect the electrical
current from the installation of