Product Features; Assembly And Installation - universalblue ESPOT User Manual

ENGLISH
outlet.
Do not allow the power cord
•
to hang (i.e., over the edge of a
table or counter) where it may
be tripped over or pulled.
Do not operate product if the
•
power cord is cut, damaged, or if
the wires are exposed.
Do not immerse or expose the
•
motor housing, power cord, or
plug to water or other liquids.
Disconnect the plug (do not pull
•
on the power cord) from the
electrical outlet.
Do not put any stress on the
•
power cord where it connects to
the product, as the power cord
could fray and break.
Do not operate the product if it
•
has a damaged power cord or
plug, malfunctions, is dropped,
or damaged. This product has
no user –serviceable parts. Do
not attempt to examine or repair
this product yourself. Qualified
service personnel
perform any servicing.
This product is intended for
•
indoor, non-commercial, non-
industrial, household use only.
Do not use outdoors.
This appliance is not intended
•
for use by persons (including
children) with reduced physical,
sensory or mental capabilities,
or lack of
knowledge, unless they have
been given
instruction
of the appliance by a person
responsible for their safety.
12
should
experience and
supervision
concerning use
Children should be supervised
•
to ensure that they do not play
with the appliance.

PRODUCT FEATURES

The contents of the package will contain
the following. See pictures 01 and 02 on
page 4 .
Note: The picture is for reference only. The
content may vary depending on the model.
Packaging content:
1. Front Grill
2. Blade Lock Nut
3. Blade
4. Grill Lock Nut
5. Back Grill
6. Motor
7. Front Motor Cover
8. Motor Cover
9. Oscillation Button
10. Motor Holder
11. Speed Button
12. Base
13. Base Fixed Screw
You can check the product features in table
01 on page 5.

ASSEMBLY AND INSTALLATION

Before using this appliance, remove
the packaging and inspect the fan. If
the appliance may be damaged, please
contact the store where you purchased
it.
See pictures 01 and 02 on page 4 .
• Take the main body, put it into the
base (12), and fixed by base fixed
or
screw (13)
• Take the back grill (5), put it on the
motor (6), and fixed by grill lock nut
(4)