Related Manuals for Gator GALT02
Summary of Contents for Gator GALT02
- Page 1 GALT02 QUICK START GUIDE For more information on the Gator range go to our website gatordriverassist.com...
-
Page 2: Product Specifications
Please ensure that you have read the product quick start guide and instructions prior to installation and use. Failure to do so may result in the product incorrectly operating or an installation that renders the device unusable. Product specifications • Pitch angle: -40° - +40° •... - Page 3 Display Elevation Altitude Digital Clock / Date Pitch Fatigue Alarm Roll GPS Data Collection Longitude & Latitude Volume Adjustment Barometer Auto Brightness Digital Compass Ambient Light Speed Meter Speaker Thermometer Ambient Light Mode Setting/ Voltage Indicator Pitch & Roll Angle Reset...
- Page 4 Functions 1. Elevation When GPS data is collected, it will display the Altitude elevation altitude. Displays the pitch angle of the car's current 2. Pitch position. Displays the roll angle of the car's current 3. Roll position. 4. Longitude Displays the longitude & latitude of the vehicle's &...
- Page 5 Functions When the vehicle has been working continuously 11. Fatigue for 4 hours, a fatigue driving icon will be Alarm displayed on the display to remind the driver that he needs to rest. When GPS data is collected, it will display GPS 12.
-
Page 6: Installation
Installation External GPS Module Concentrator 1. Connect the ACC wire to the ACC power supply of the car, then connect the GND wire to a suitable ground point. 2. The plug of GPS module should be plugged into the socket of the concentrator, then position the GPS module in a suitable location on the dashboard in the vehicle to receive optimal signal. - Page 7 Settings Volume: To change the default volume of the device, press the Volume Button(13) whilst the device is on. Each press will cycle up through the values (0-9/ 0 is Mute) Time Zone: To change the default time zone of the device, press and hold the Reset button(17) whilst the device is off (vehicle ignition is switched off).
- Page 8 Settings cont... displayed on the screen. To cycle between the options, turn off the ignition and press and hold the Volume Button(13) to display the next option. Once the desired option has been set, turn on the device, the measurement will be set to the chosen type.
-
Page 9: Technical Assistance
Technical assistance If you need assistance setting up or using your Gator product now or in the future, call Gator Support Australia. TEL: 03 – 8587 8898 FAX: 03 – 8587 8866 Mon-Fri 9am –...
Need help?
Do you have a question about the GALT02 and is the answer not in the manual?
Questions and answers