Page 1
Product Overview The GRM430EM is an OE Grade Mirror Monitor that is reverse mirror compatible. It is just like a normal rear view mirror with a built in 4.3” screen allowing you to see what is behind the vehicle when reverse gear is engaged (additional rear view camera needed).
Technical Specifications: Panel TFT LCD (Digital) Power Supply DC12V Screen Size 4.3” Brightness 1000cd/m2 Resolution 480x272 OSD Menu Available Aspect Ratio 16:9 Signal System PAL/AUTO/NTSC Power 3.6W (Working) Two Video Inputs AV1-Additional Input Consumption 0.3W (Standby) AV2-Camera Do not use the Mirror in a damp working environment, as it is not waterproof. Do not open or try to repair the Mirror by yourself.
Product Structure: 1. Ambient light sensor 2. Power ON/Off/ Brightness Adjust 3. Working indicator System Operation This system has signal sensing. When the Video 1 or 2 inputs see a signal, the display will automatically turn on. When the signal is removed, it will automatically turn off. If both inputs see a signal, Input 2 will override Input 1.
Page 4
Installation Notes This system is has signal sensing, there is no “reverse trigger wire” in the wire harness. Be sure to use a relay with CANBUS vehicles (not included) to power your camera, as most vehicles’ reverse lamp wires are now variable voltage wires, and will cause a fuzzy or distorted image. (PIC 2) Installation 1.
Negetive wire connects to chassis or negative of lamp) Butterfly Camera Technical Assistance If you need assistance setting up or using your Gator product now or in the future, call Gator Support. Australia TEL: 03 – 8587 8898 FAX: 03 –...