INTRODUCTION WELCOME Thank you for purchasing the Gator GRV43KT 4.3” Monitor + Reverse Camera. Please ensure that you have read the product manual and instructions in full, prior to installation and use. Failure to do so may result in product failure/damage or incorrect operation and therefore impact the product performance.
TABLE OF CONTENTS INTRODUCTION.................PAGE: 2 PRODUCT FEATURES..............PAGE: 2 PACKAGE COMPONENTS............PAGE: 2 TABLE OF CONTENTS..............PAGE: 3 INSTALLATION OF MONITOR............PAGE: 4 INSTALLING THE CAMERA............PAGE:5-6 TESTING THE REVERSE CAMERA FUNCTION......PAGE:7 MENU FUNCTIONS...............PAGE:7 PRODUCT SPECIFICATIONS............PAGE:8 TECHNICAL ASSISTANCE............PAGE:8 PAGE 3 GRV43KT INSTRUCTION MANUAL...
Page 4
INSTALLATION Installation diagram The video signal is transferred from the camera to the GRV43KT monitor via an RCA cable that will need to be run through the boot, through the passenger compartment to the mirror monitors wired loom run under the dash.
In fact the opposite is true. Most vehicles do not require an additional module. If a CAN BUS module is required we recommend seeking advice from a professional installer. PAGE 5 GRV43KT INSTRUCTION MANUAL...
Page 6
Scrape off the cars paint around the hole to ensure good earth. 5. Connect the RCA cable to the RCA socket from the monitors loom. PAGE 6 GRV43KT INSTRUCTION MANUAL...
- Low-Lux CMOS camera - Parking guide lines - NTSC TECHNICAL ASSISTANCE If you need assistance setting up or using your Gator product now or in the future, call Gator Support. Australia TEL: 03 – 8587 8898 FAX: 03 – 8587 8866 Mon-Fri 9am –...