Stiga AM 98 Li 48 V1 Operator's Manual page 274

6. The icon (fig. 9.F) and
(fig. 9.L) remain lit and
the battery LEDs 2 and 4
continue to flash.
Pushbutton panel type "I"
and "II"
Pushbutton panel type
"III"
7. The icon (fig. 9.F) remains
lit and the battery LEDs 1, 4
and 5 continue to flash.
Pushbutton panel type "I"
and "II"
Pushbutton panel type
"III"
8. The icons (fig. 9.F) and
(fig. 9.L) remain lit and
the battery LEDs 1 and 3
continue to flash.
Pushbutton panel type "I"
and "II"
Pushbutton panel type
"III"
overheating/sub-heating
of the battery due to:
1. Heavy working
conditions.
2. Unsuitable
environmental
conditions
Current overload on the
cutting means due to:
1. Heavy working
conditions.
2. Obstructions
hindering the rotation
of the cutting means.
3. Cutting-means
assembly is full of
grass.
Cutting means motors
overheating due to:
Heavy working
conditions.
EN - 28
Turn the machine off, wait at least 5 minutes and then
re-start it
Reduce the travel speed
Increase the cutting height:
Work in an environment suitable to the machine
operational conditions
Reduce the travel speed
Increase the cutting height:
Remove the obstructions.
Clean the cutting-means assembly.
Turn the machine off, wait at least 5 minutes and then
re-start it.
Reduce the travel speed
Increase the cutting height: