Stiga AM 98 Li 48 V1 Operator's Manual page 261

Cutting height adjustment
buttons
These buttons are used to raise
(fig. 9.K1) and lower (fig. 9.K2) the
cutting means assembly, which may
be positioned at 7 different cutting
heights.
See paragraph 6.5.2.
You can see the cutting height on
the screen bar, icon fig.9.W.
Gear mode buttons
When started, the machine
automatically runs in "STANDARD"
Mode. These buttons are used to
reach the maximum speed of the
machine (fig. 9.R "PERFORMANCE"
Mode) or to reduce speed of the
traction in order to guarantee the
maximum manouverability (fig.
9.P "COMFORT" Mode). If no
Modes is selected,the traction is in
"STANDARD" Mode.
"PERFORMANCE" gear mode
icon
The icon (fig. 9.S) is lit when the
machine is in "PERFORMANCE
mode".
"COMFORT" gear mode icon
The icon (fig. 9.Q) is lit when the
machine is in "COMFORT" gear
mode.
Attention icon
If icon fig. 9.F is illuminated, it
indicates failure to comply with
safety conditions or a possible
malfunction of the machine (see
chap. 15).
Battery LED
The LEDs fig. 9.B generally
indicate the charge level of the
machine's batteries but in particular
combinations their lighting status
provides information about machine
malfunctions (see chap. 15).
"Bluetooth" icon
The icon in fig. 9.D is illuminated
when the machine and the data
exchange device are connected.
Controller and/or motor and/or
battery over-temperature icon
The icon in fig. 9.L indicates
overheating of electrical
components. See chap. 15.
Transmission engagement /
disengagement lever icon
The icon in fig. 9.I is illuminated
when the transmission is not
engaged (see par. 6.3 and chap.
15).
Operator on-board icon
The icon in fig. 9.H is illuminated
when operator leaves the driving
seat (see par. 7.2.2).
Emergency pushbutton icon
The icon in fig. 9.G is illuminated if
the emergency button is activated
(see par. 6.2).
"ECO" icon
The icon in fig. 9.U is illuminated
when the ECO mowing mode is
selected.
"BOOST" icon
The icon in fig. 9.V is illuminated
when the BOOST mowing mode is
selected.
"AUTOMATIC CUT" icon
The icon in fig.9.J2 is illuminated
when the "AUTOMATIC CUT"
mowing mode is selected.
Cutting height symbol
The symbol fig. 9.W is graphically
divided into seven sections, each of
which indicates a different cutting
height.
Digit percentage of battery
charge
The digits fig. 9.Y indicate the
percentage of battery charge.
NOTE
Should the machine show an
anomaly, the digits provide a
numeric error code identifying the
anomaly.
If necessary, provide the numerical
error code to the Authorized Service
Centre.
EN - 15
ATTENTION