Table of Contents
Advertisement
Quick Links
Advertisement
Chapters
Table of Contents
Related Manuals for Stiga A1500
Summary of Contents for Stiga A1500
- Page 1 A 1500 A 3000 A 5000 Instruction manual...
-
Page 2: Table Of Contents
ENGLISH - TRANSLATION OF THE ORIGINAL INSTRUCTIONS TABLE OF CONTENTS 1. MODELS TECHNICAL DATA 1.1. MODELS ..............................1 1.2. TECHNICAL DATA ............................2 2. SAFETY 2.1. SAFETY INFORMATION ..........................3 2.2. SAFETY INSTRUCTIONS ........................... 5 2.2.1. SAFE OPERATING PROCEDURES ........................5 2.2.2. - Page 3 5.2. MANUAL FUNCTIONING OF THE ROBOT LAWN MOWER ..............41 5.3. CONTROLS DESCRIPTION ON THE ROBOT LAWN MOWER ............... 42 5.3.1. SAFE STOP - STOP BUTTON ..........................43 5.3.2. SAFE SHUTDOWN - SAFETY KEY ........................43 5.3.3. SWITCHING ON AND OFF - ON/OFF BUTTON ....................44 5.3.4.
-
Page 5: Models Technical Data
MODELS AND TECHNICAL DATA 1.1. MODELS A 1500 A 3000, A 5000 NOTE: the instructions in this manual apply to robot lawn mower models A 1500, A 3000 and A 5000. All illustrations, unless otherwise indicated, refer to the A 1500 model. 1. -
Page 6: Technical Data
1.2. TECHNICAL DATA UNIT OF STIGA A 1500 STIGA A 3000 STIGA A 5000 SPECIFICATIONS MEASURE Dimensions (WxHxD) [mm] 413 x 252 x 560 529 x 299 x 695 529 x 299 x 695 Weight of the robot lawn mower [kg] 12.5... -
Page 7: Safety
SAFETY 2.1. SAFETY INFORMATION In the design of the device, special attention has been paid to aspects that can cause risks to the safety and health of people. The purpose of this information is to sensitize users to prevent any risk, avoiding behaviours that do not comply with the regulations reported. - Page 8 CAUTION: For safety reasons, the satellite reference station must never be moved after the programming of the virtual perimeters, transition routes and areas to be avoided. The robot lawn mower could exit the programmed work area. If the reference station is moved, the programming must be repeated.
-
Page 9: Safety Instructions
OBLIGATION: Read the entire manual carefully, especially all safety information, and make sure you fully understand it. Follow the operating, maintenance and repair instructions carefully. OBLIGATION: Operators carrying out maintenance and repair interventions must be fully familiar with its speci昀椀c characteristics and safety standards. GLOVES OBLIGATION: Use personal protection foreseen by the Manufacturer. - Page 10 Maintenance and storage a. Tighten all nuts, bolts and screws securely for safe operation of the machine. b. Frequently check the robot lawn mower for wear or deterioration. c. For safety reasons it is necessary to replace worn out or damaged parts. d.
-
Page 11: Stopping And Turning Off The Robot Lawn Mower In Safe Conditions
2.3. STOPPING AND TURNING OFF THE ROBOT LAWN MOWER IN SAFE CONDITIONS OBLIGATION: Always switch o昀昀 the robot lawn mower in safe conditions before any cleaning, transport or maintenance operation. Requirements and obligations: • Safety key. Procedure: 1. Press the “STOP” (A) button to stop the robot lawn mower safely and open the protective cover (B). 2. -
Page 12: Introduction
INTRODUCTION 3.1. GENERAL INTRODUCTION 3.1.1. PURPOSE OF THE MANUAL This manual is an integral part of the device and it is intended to provide the information necessary for its use. Keep this manual for the entire life of the device, so that it is always available in case of need. The recipient of the manual is the user of the device, who is required to carefully read the information contained therein and apply it rigorously to protect people's safety and to avoid damage. -
Page 13: Product Overview
3G/4G modules 昀椀 tted with SIM cards. The operating technology of the robot lawn mower is based on data communication between STIGA Cloud and the robot itself. The subscription fee is mandatory in order to operate the robot lawn mower and is based on the amount of data required. -
Page 14: Main Components
3.2.2. MAIN COMPONENTS (A) Robot lawn mower (F1) Instruction manual (B) Battery/ies (depending on the model) (F2) Fixing screws for the docking station (F3) Blister with blades and 昀椀 xing screws (C) Docking station (D) Satellite reference station (inside the (F4) App Lock label docking station) (F5) Safety key... -
Page 15: Unpacking
3.3. UNPACKING Following are listed all the steps to perform the correct unpacking: 1. Open the box of the robot lawn mower; 2. Take out the power supply box; 3. Take out the upper containment carton; 4. Take out the robot lawn mower; 5. -
Page 16: Symbols And Nameplates
3.4. SYMBOLS AND NAMEPLATES Below all the symbols on the robot lawn mower are listed: WARNING: Read the user instructions before starting the product. WARNING: Danger of projections of objects against the body. Keep an adequate safe distance from the machine while it is running. WARNING: Do not put hands and feet near or under the opening of the cutting means. -
Page 17: General Instructions On How To Read The Manual
All the symbols on the Battery are shown below: WARNING: Read the user instructions before starting the product. Do not dispose of the battery as normal household waste. Dispose of the battery in the appropriate authorized collection centres. Do not throw the battery into the 昀椀re and do not expose it to heat sources. Do not immerse the battery in water and do not expose it to moisture. -
Page 18: Installation
4.1. GENERAL INSTALLATION INFORMATION CAUTION: Do not modify, tamper with, elude or eliminate the safety devices installed. NOTE: For further clari昀椀cation on the installation of the product please contact a STIGA dealer. 4.2. INSTALLATION COMPONENTS (A) Docking Station (B) Power supply... -
Page 19: Istallation Requirements Check
4.3. VERIFICATION OF THE INSTALLATION REQUIREMENTS Below the procedures to check the necessary requirements and prepare the garden before proceeding with the installation are described. 4.3.1. GARDEN VERIFICATION: • Carry out a survey of the entire area for a correct detection of the state of the garden, of any obstacles and areas to be excluded. - Page 20 WARNING: The power cable (B), power supply unit, extension cord and all other electric cables which do not belong to the product must remain outside the cutting area to maintain their distance from hazardous moving parts and prevent damage to cables which may come into contact with live parts.
- Page 21 • If the docking station (A) with satellite reference station (B) is not positioned in an area where the sky is fully visible, the satellite reference station (B) must be removed from the docking station (A) and installed in an area where the sky is fully visible. The satellite reference station (B) must be positioned above disturbing elements such as dense foliage trees, hedges, boundary walls, metal fences, buildings and re昀氀...
- Page 22 • Make sure that the area chosen for installing the docking station (D) is at least 400 cm away from the docking station (E) of a possible second robot lawn mower. WARNING: The excessive proximity between two docking stations could cause interference. •...
-
Page 23: Checks For The Definition Of Virtual Boundaries
4.3.3. CHECKS TO DEFINE THE VIRTUAL PERIMETERS: 1. Check that the maximum slope of the work area is less than or equal to 45% or 50% depending on the model (see Par. 1.2 TECHNICAL DATA). For the de昀椀 nition of virtual boundaries, please comply with the rules shown in the following images: a) if the slope is ≤... - Page 24 WARNING: The robot can mow surfaces with a maximum slope of 45% or 50% depending on the model. In case of non-compliance with the instructions, the robot may slip and exit the work area. WARNING: Areas with slopes higher than allowable slopes cannot be mowed. Position the virtual perimeter before the slope, excluding that area of lawn from the mowing.
-
Page 25: Criteria For Delimiting Work Areas And Transfer Routes
4.4. CRITERIA FOR DELIMITING WORK AREAS AND TRANSFER ROUTES 4.4.1. MINIMUM VIRTUAL BOUNDARIES AND DELIMITATION DISTANCES Procedure: 1. If there is a pavement or driveway (A) at the same level as the lawn, the virtual boundary can coincide with the edge of the pavement. It is also possible to programme the virtual boundary by guiding the robot lawn mower over the edge of the pavement. - Page 26 >50 cm 4. INSTALLATION...
-
Page 27: Walkways From One Area Of The Garden To Another
4.4.2. TRANSITIONS BETWEEN DIFFERENT AREAS OF THE GARDEN Procedure: 1. In case of corridors, the distance between two di昀昀 erent virtual boundaries must be Z ≥ 2 m 2. In the case of a passage Z < 2 m, zone (A) may not be reachable by the robot lawn mower automatically and in this case is to be classi昀椀... -
Page 28: Components Installation
4.5. COMPONENTS INSTALLATION ELECTRICAL HAZARD: CAUTION: Only use the battery charger The circuit provided must be and power supply provided by protected by a residual current the manufacturer. Improper use device (RCD) with an activation may cause electric shock and\or current not exceeding 30 mA. -
Page 29: Docking Station Installation
4.5.1. INSTALLATION OF THE DOCKING STATION CAUTION: CAUTION: Danger of cutting hands. Danger of dust in the eyes. ELECTRICAL HAZARD: Connect the power supply only at the end of all the installation operations. If necessary during the installation, turn o昀昀 the general power supply. - Page 30 The robot lawn mower needs to receive the satellite signal even while it is inside the docking station. If a protective cover is to be installed over the docking station, only original STIGA covers should be used. Do not, under any circumstances, install metal covers over the docking station.
-
Page 31: Installation Of The Satellite Reference Station
4.5.2. INSTALLING THE SATELLITE REFERENCE STATION ELECTRICAL HAZARD: CAUTION: Only use the battery charger The circuit provided must be and power supply provided by protected by a residual current the manufacturer. Improper use device (RCD) with an activation may cause electric shock and\or current not exceeding 30 mA. - Page 32 4. INSTALLATION...
- Page 33 Requirements and obligations: • Satellite reference station (A). • 5 metre extension cable (L) (included). • or 15-metre extension cable (to be purchased separately) (L). • Or power supply unit (F) (to be purchased separately). • Mounting bracket (E) • Screws for 昀椀 xing the satellite reference station to the bracket (G). •...
- Page 34 NOTE: If necessary, it is possible to extend the cable powering the satellite reference station using extension cables. It is permitted to use a maximum of two 5-metre extension cables or one 15-metre cable (See Chapter 9 “Accessories”). NOTE: To avoid any interference, the satellite reference station must be installed at least 400 cm away from other satellite reference stations that may be in the vicinity.
-
Page 35: Robot Lawn Mower Recharge After Installation
The programming of the virtual perimeters, transition routes and areas to be avoided is performed using the respective “STIGA.GO APP” wizards. The procedure requires you to guide the robot lawn mower manually by walking alongside it according to the general instructions provided in chapter 4.4 Requirements and obligations: •... - Page 36 Procedure: 1. Download the "STIGA GO" APP from Google Play Store for Android devices or from the App Store for iOS devices. 2. Follow the APP set-up wizard (for more information refer to par. APP). CAUTION: The operating area or routes used by the machine while operating must be set up away from public areas to avoid damage to persons, property or vehicle accidents.
-
Page 37: Product Settings
Bluetooth connection. To add a new STIGA product, press the "add" (+) button and follow the set-up wizard. To complete the pairing procedure, the robot lawn mower and the satellite reference station must be less than 8 metres away from the mobile device. -
Page 38: Garage And Device Page
(See Par. 5.3.6). 4.7.4. GARAGE AND DEVICE PAGE The "Garage" section displays all Stiga products associated with the user pro昀椀le. The paired items are displayed by scrolling left or right through the di昀昀erent screens. For each of the items displayed, it is possible to access a range of options allowing the user to: •... -
Page 39: Configuration Of The Docking Station
4.7.6), initialization of the robot lawn mower (par. 4.7.7). The programming of the virtual perimeters, transition routes and areas to be avoided is performed using the respective STIGA.GO App wizard. The procedures require to manually guide the robot lawn mower, walking beside it. -
Page 40: Programming The Return Route To The Docking Station
1. Follow the robot start-up procedure in the APP. 2. Guide the robot lawn mower with the joystick to the point where you want to start programming. 3. Start recording boundaries or virtual routes by pressing the designated button. 4. Guide the robot lawn mower manually, using the joystick, around the perimeter or route to be pro- grammed. -
Page 41: Garden Map
4. Start recording the return journey to the docking station by pressing the dedicated button 5. Guide the robot lawn mower manually using the joystick along the path to be programmed until the robot connects with the charging contacts 6. Con昀椀rm the recording. NOTE: Do not move the robot lawn mower by hand, any manual handling of the robot lawn mower requires the initialisation procedure to be repeated. -
Page 42: Integration With Voice Assistants (Amazon Alexa, Google Home)
4.7.14. INTEGRATION WITH VOICE ASSISTANTS (AMAZON ALEXA, GOOGLE HOME) The integration with a voice assistant makes it possible to interact with the robot lawn mower according to the options available on the app, for example: • Starting a work session. •... -
Page 43: Rain Sensor
When the robot lawn mower is moved away from the virtual perimeter for more than 100 metres: • The robot sends a noti昀椀cation to the user's mobile device through the Stiga.GO App. • On the app, it is possible to view the actual position of the robot and track its movements. -
Page 44: Functions
OPERATION Requirements and obligations: • Installation of the docking station • Programming virtual boundaries, transfer and satellite reference station (See routes and areas to be avoided (See par. 5.6) Chapter 4.5) • Initial grass height in the robot lawn mower operating range: 20-60 mm •... -
Page 45: Manual Functioning Of The Robot Lawn Mower
5.2. MANUAL FUNCTIONING OF THE ROBOT LAWN MOWER The robot lawn mower can be used without performing the programming procedure described in Par. 4.7. In this mode the robot lawn mower carries out a work cycle, returns to the docking station and remains there until the next manual start. -
Page 46: Controls Description On The Robot Lawn Mower
5.3. DESCRIPTION OF THE CONTROLS ON THE ROBOT LAWN MOWER List of controls, indicators and their function: • The “STOP” button (A): is used to safely stop the robot mower. • The “SAFETY KEY” (D): is used for the safety shut-down of the robot lawn mower. •... -
Page 47: Safe Stop - Stop Button
5.3.1. SAFE STOP - STOP BUTTON The “STOP” button (A) is a control that stops the robot lawn mower in safety conditions, whatever its operating condition is. Procedure: 1. Press the "STOP" button (A) while the robot lawn mower is moving or already still. 2. -
Page 48: Switching On And Off - On/Off Button
5.3.3. SWITCHING THE ROBT LAWN MOWER ON AND OFF - ON / OFF BUTTON The "ON / OFF" button (E) allows to switch the robot lawn mower on and o昀昀 manually. Procedure: 1. Press the “STOP” button (A) to open the cover (B) and access the control panel (C). 2. -
Page 49: Scheduled Programme Selection / Single Work Cycle / Forced Return To Docking Station - Mode Selection Button
5.3.4. SCHEDULED PROGRAMME SELECTION / SINGLE WORK CYCLE / FORCED RETURN TO DOCKING STATION - MODE SELECTION BUTTON The "MODE SELECTION" button is used to activate or deactivate the set work program via the App and to select the forced return to the docking station. The robot lawn mower operates according to the possible selections described below. - Page 50 Procedure: 1. Press the “STOP” button (A) to open the cover (B) and access the control console (C). 2. Press the “MODE SELECT” button (F) until the icons of the functions you wish to activate 昀氀 ash. The icons relating to the selected functions 昀氀 ash. 3.
-
Page 51: Bluetooth Status Display And Unpairing- Bluetooth Button
5.3.5. BLUETOOTH STATUS DISPLAY - BLUETOOTH BUTTON The robot lawn mower handles automatically the Bluetooth connection with external mobile devices. The Bluetooth connection is available at all times when the robot lawn mower is switched on. It is possible to connect only one mobile device at a time to the robot lawn mower via Bluetooth. -
Page 52: Battery State Of Charge Display-Battery Icon
5.3.7. BATTERY CHARGE DISPLAY-BATTERY ICON The “BATTERY” light icon (O) indicates the battery charge status. Procedure: 1. Press the “STOP” button (A) to open the cover (B) and access the control panel (C). 2. Check the battery charging status through the light icon (O): - Blue icon: the battery is charged (charge level >40 %). -
Page 53: Starting The Robot Lawn Mower - Start Button
5.3.8. STARTING THE ROBOT LAWN MOWER To start up the robot lawn mower, follow the procedure described in par. 5.3.4 “SCHEDULED PROGRAM SELECTION / SINGLE WORK CYCLE / FORCED RETURN TO DOCKING STATION - MODE SELECTION BUTTON". 5.4. FUNCTIONING OF THE DOCKING STATION The docking station is equipped with an indicator light (N) that lights up in the following manner: •... -
Page 54: Cutting Height Adjustment
5.6. CUTTING HEIGHT ADJUSTMENT The “CUTTING HEIGHT ADJUSTMENT " procedure describes how to adjust the height of the cutting blades. • The length X of grass cut by the robot lawn mower must not exceed 10mm. • The robot lawn mower's operating range is 20-60 mm (cutting height). •... -
Page 55: Maintenance
MAINTENANCE 6.1. SCHEDULED MAINTENANCE CAUTION: CAUTION: Only use original spare parts. Do not modify, tamper with, elude or eliminate the safety devices installed. For a better operation and longer life, be sure to clean the product regularly and replace worn parts. Perform the interventions following the frequency indicated in the table. -
Page 56: Product Cleaning
6.2. PRODUCT CLEANING CAUTION: CAUTION: Danger of cutting hands. Danger of dust in the eyes. Requirements and obligations: • Sponge • Dry cloth • Neutral soap • Gloves • Brush • Glasses • Water GLOVES OBLIGATION: GLASSES OBLIGATION: Use protective gloves to avoid Use safety glasses to avoid the cutting your hands. - Page 57 BAN: To avoid irreversible damage to the electrical and electronic components, do not immerse the robot lawn mower, partially or completely, in water. BAN: Do not wash the internal parts of the robot lawn mower to avoid damaging the electrical and electronic components. BAN: Do not use solvents or petrol so as not to damage varnished surfaces and plastic parts.
-
Page 58: Cutting Blades Replacement
6.3. REPLACEMENT OF THE CUTTING BLADES CAUTION: Danger of cutting hands. Requirements and obligations: • Safety key • Key • Cutting blades • Gloves GLOVES OBLIGATION: Use protective gloves to avoid cutting your hands. Procedure: 1. Press the “STOP” (A) button to stop the robot lawn mower and open the protective cover (B). 2. -
Page 59: Winter Battery Maintenance And Storage
NOTE: The battery must be recharged every 6 months and, in any case, before winter storage. 6.5. BATTERY REPLACEMENT Battery replacement is the sole responsibility of the STIGA TECHNICAL ASSISTANCE STAFF. If the battery needs to be replaced, contact a service centre or your retailer. 6. MAINTENANCE... -
Page 60: Troubleshooting
TROUBLESHOOTING CAUTION: Stop the robot lawn mower and bring it back to safety conditions (See Par. 2.3). Below there is the list of any anomalies that may arise during the work phase. PROBLEM CAUSES SOLUTIONS Damaged cutting disc or blades Replace the damaged components (See Par. - Page 61 Insu昀케cient working hours. Extending the working hours (See Par. 4.7.12). Switch o昀昀 the robot lawn mower in safety Cutting device with encrustations and / or residues. conditions (See Par. 2.3). Clean the cutting device. Switch o昀昀 the robot lawn mower in safety Pivoting cutting blades blocked by encrustations or residues.
-
Page 62: Transport, Storage And Disposal
TRANSPORT, STORAGE AND DISPOSAL 8.1. TRANSPORT Procedure: NOTE: We recommend using the original packaging for transport over long distances. 1. Press the “STOP” (A) button to stop the robot lawn mower and open the protective cover (B). 2. Remove the safety key (C). 3. -
Page 63: Accessories
ACCESSORIES Speci昀椀cations Art. number Description 1127-0009-01 Cutting blades 12 pcs 1127-0011-01 Docking station cover For additional protection against rain and sunlight 1127-0010-01 Cable extension for charger Cable to extend the connection between the power supply and the docking station Also usable for the satellite reference station. -
Page 64: Warranty
WARRANTY 10.1. WARRANTY COVERAGE The warranty conditions are intended for consumers only, i.e. non-professional operators. The warranty covers all material quality and manufacturing defects recognised during the warranty period by your Dealer or Authorised Service Centre. The warranty is restricted to the repair or replacement of components recognised as faulty. It is advisable to send your machine once a year to an authorized service workshop for servicing, assistance and safety device inspection. -
Page 65: Ec Declaration Of Conformity
Ampiezza di taglio: 18 cm n) Persona autorizzata a costituire il Fascicolo Tecnico: ST. S.p.A. Via del Lavoro, 6 31033 Castelfranco Veneto (TV) - Italia o) Castelfranco Veneto, 01/12/2022 CEO Stiga Group Sean Robinson 171514261/1 11. EC DECLARATION OF CONFORMITY... - Page 66 Person authorised to compile the technical 昀椀le: ST. S.p.A. Via del Lavoro, 6 31033 Castelfranco Veneto (TV) - Italia o) Castelfranco Veneto, 01/12/2022 CEO Stiga Group Sean Robinson UK Importer: STIGA LTD Unit 8, Bluewater Estate Plympton, Devon, PL7 4JH, England 171514261/1 11.
- Page 67 EN IEC 55014-2:2021 i) Ampiezza di taglio: 18 cm n) Persona autorizzata a costituire il Fascicolo Tecnico: ST. S.p.A. Via del Lavoro, 6 31033 Castelfranco Veneto (TV) - Italia o) Castelfranco Veneto, 01/12/2022 CEO Stiga Group Sean Robinson 171514262/1 11. WARRANTY...
- Page 68 Person authorised to compile the technical 昀椀le: ST. S.p.A. Via del Lavoro, 6 31033 Castelfranco Veneto (TV) - Italia o) Castelfranco Veneto, 01/12/2022 CEO Stiga Group Sean Robinson UK Importer: STIGA LTD Unit 8, Bluewater Estate Plympton, Devon, PL7 4JH, England 171514262/1 11.
- Page 69 FR (Traduction de la notice originale) DE (Übersetzung der NL (Vertaling van de oorspronkelijke Originalbetriebsanleitung) gebruiksaanwijzing) Déclaration CE de Conformité (Directive Machines 2006/42/CE, Annexe II, EG-Konformitätserklärung EG-verklaring van overeenstemming partie A) (Maschinenrichtlinie 2006/42/EG, Anhang (Richtlijn Machines 2006/42/CE, Bijlage II, 1. La Société II, Teil A) deel A) 2.
- Page 70 CS (Překlad původního návodu k používání) PL (Tłumaczenie instrukcji oryginalnej) ET (Algupärase kasutusjuhendi tõlge) ES – Prohlášení o shodě Deklaracja zgodności WE EÜ vastavusdeklaratsioon (Směrnice o Strojních zařízeních (Dyrektywa maszynowa 2006/42/WE, (Masinadirektiiv 2006/42/EÜ, Lisa II, osa A) 2006/42/ES, Příloha II, část A) Załącznik II, część...
- Page 71 STIGA LTD (UK Importer) Unit 8, Bluewater Estate Plympton, Devon, PL7 4JH, England À DÉPOSER À DÉPOSER EN MAGASIN EN DÉCHÈTERIE Cet appareil, ses accessoires, STIGA S.p.A. piles et cordons se recyclent Via del lavoro, 6 31033 Castelfranco Veneto (TV) Points de collecte sur www.quefairedemesdechets.fr...
Need help?
Do you have a question about the A1500 and is the answer not in the manual?
Questions and answers
No connection after hibernate On/Off button does not light up
The Stiga A1500 may not be connecting after hibernation, and the On/Off button may not be lighting up due to a missing power supply or a fault in the charging base. Check that the power supply unit is correctly plugged in and verify the integrity of the power supply connection cable. If the issue persists, turn off the charging base and turn it on again after a few minutes. If the problem continues, contact a service center.
This answer is automatically generated