SYMBOLS The following symbols can be found on the machine to remind you of the care and attention that are required during use. The symbols mean: Warning! Read the instruction manual and the safety manual before using the machine. Warning! Do not insert your hands or feet under the cover when the machine is in operation.
5. After setting, tighten the screws properly. CUTTING HEIGHT The cutting height can be varied between a number of fixed positions, from 30 to 85 mm. Item no. 13-2934: The cutting height is continuously variable from 30 to 85 mm. Note: Stated cutting heights apply when the machine is on a firm surface.
PATENT - DESIGN REGISTRATION This machine or parts thereof is covered by the following patent and design registration: 9902299-8 (SE), SE/00/01222 (PCT) STIGA reserves the right to make alterations to the product without prior notification. ENGLISH...