Removal And Disposal; Prerequisites For Removal And Disposal; Removal; Disposal - MAXIMATOR SLGP 3 Series Installation And Operating Manual

9

Removal and disposal

9.1

Prerequisites for removal and disposal

Follow the manual and general drawing for the product.
In addition, the following conditions must be met:
–
The product must be in a safe state.
–
The product must be at ambient temperature.
9.2

Removal

Danger due to operating fluid residues!
The high pressure unit and the bleed chamber can contain operating fluid resi-
dues. Depending on the operating fluid, these residues can be hazardous. Im-
proper handling of operating fluids can lead to accidents resulting in severe
injuries or death.
► Flush the high pressure unit.
► The bleed chamber cannot be flushed. Take precautionary measures to pro-
tect workers.
► Assess the risk for the equipment in the overall risk assessment.
Risk of injury when handling lubricants!
Handling lubricants can lead to accidents resulting in severe or fatal injuries.
► Use protective gloves and goggles.
► Avoid contact with the skin.
► Observe the safety data sheet of the lubricant accordingly.
To remove the pump, carry out the following steps:
– Shut down the pump.
– Depressurise it.
– Loosen the fastening screws and connections.
–
Dismantle the pump.
9.3

Disposal

If the service life has expired: Send the product back to Maximator, postage paid,
for proper disposal.
0000000383 - 001 - EN
WARNING
WARNING
Removal and disposal
40