Table of Contents
Advertisement
Description
2.
Clean the inside and outside of the pump.
3.
Replace all seals and guide elements.
4.
Replace damaged pump components as necessary.
5.
Assemble the pump. Apply a thin and even layer of lubricant to the follow-
ing surfaces:
–
–
Specially designated areas must be treated according to drawing indica-
tions.
6.
Check the pump.
This includes the following maintenance work:
–
–
7.
If the pump has passed all tests, the repair is complete.
Maximator devices can be sent in for repairs to your local Maximator representa-
tive. All the necessary details are available on the Maximator website http://
www.maximator.de
7.3
Spare parts and consumables
Risk of injury due to inappropriate spare parts!
Making repairs using inappropriate spare parts can lead to accidents resulting in
severe injuries or death.
► Only use spare parts that comply with Maximator specifications.
A list of the available spare parts, spare part kits and consumables can be found
on the general drawing.
7.4
Accessories and special tools
A variety of special accessories are available for the liquefied gas pump.
Please consult with our sales department.
The tools used for the products are continuously being updated and supplement-
ed.
An overview of the currently available tools is accessible upon request when con-
tacting the Maximator customer service.
0000000383 - 001 - EN
Contact surfaces of seals and guide elements
Seals
7.2.1 - System check
7.2.6 - Leak test
WARNING
Maintenance
36
Advertisement
Table of Contents
Need help?
Do you have a question about the SLGP 3 Series and is the answer not in the manual?
Questions and answers