Memory Functions - Aiwa HV-FX77K Operating Instructions Manual

wae
EJECT &
POWER
PLAY >
4REWS@ @/F FWD
STOP &
RESET
MEMO DISPLAY
MEMORY FUNCTIONS
COUNTER MEMORY FUNCTION EY
Any scene can be located on a tape. When rewinding the tape, the unit
stops when the tape counter reaches approximately "0:00:00".
1 Press the MEMO button.
2 Press the RESET button at the.point you want to locate
later.
The counter is reset to "0:00:00".
3 After playback, press the i STOP, then the <@<4/REW/@
or @/F FWD/>> button.
The tape automatically stops when the counter returnsto approximately
"0:00:00".
To display the tape.counter on the TV screen
Press the DISPLAY button repeatedly until it appears.
FUNCTION MEMORY
When the B® PLAY, & EJECT or POWER button is pressed within 2
seconds after the <#<@/REW/@ buiton is pressed, the unit rewinds to the
beginning of the tape, and enters the respective operation mode.
1 Inthe stop mode, press the <4/REW/@ button.
2 Press the desired operation button.
® PLAY: To play back the tape.
# EJECT: To eject the tape.
POWER: To turn off the power.
To cancel the function memory
Press the § STOP button.
If the counter memory function is activated, the unit enters the chosen
operation mode after the tape counter reaches "0:00:00".