Table of Contents
Advertisement
1
4
Hold down the AUTO SET button on the remote control
ar
for a few seconds.
Cc AR RY] NG
OUT
AUTO
"AUTO SET" appears on the front display of the VCR.
;
The VCR will be tuned in and the correct date and time will
SET
FUNCTION
be set. This will take about 4 minutes.
After AUTO SET has been completed, the current time
Now you can tune in the VCR and set the correct date
appears on the display.
and time automatically using the AUTO SET button on
the remote control.
Make sure to leave the VCR.and the TV on, and to
choose the video channel or video input mode on the TV.
2
Press the CHANNEL
/\
buttons to check that the
correct TV station is preset on each channel number.
TV station
4CH
BBC1
BBC2
CH5
(if available)
CATV/SAT
(SKY NEWS)
(if fitted)
CHANNEL AV
If a TV station displayed on the screen does not
match the correct channel number, change the
seeaie
channel number to correspond with the TV station.
OK
CH NO.SET
1
AUTO SET
1 Press the CH NO. SET button on the remote control.
CH NO. SET
NIe
n e ,
CH
NOW ASSET: +/~-
PUSH OK
2 Enter the correct channel number using the + —
buttons on the remote control.
CH NO. SET
al,
CH
Noss 2 CSET: +-
PUSH OK
3 Press the OK button.
For details, see page 11 of the Operating Instructions.
Advertisement
Table of Contents
