Table of Contents
Advertisement
3.1 Attached documentation
The following documents are delivered with the unit:
•
Installation, use and maintenance manual (multilingual): this manual accompanies the unit and contains the main
installation, use and maintenance information.
•
Installation, use and maintenance manual (extended): in electronic format and available on the manufacturer's
website, it offers detailed information on the installation, use and maintenance steps set out in the multilingual
manual supplied with the machine.
•
Refrigeration system diagrams (paper and electronic format).
•
Hydraulic diagrams (paper and electronic format).
•
Wiring diagram: it is specific to the machine in question. It is useful for the persons who will have to carry out work
on the electrical system, as it shows the various components and connections.
•
Dimensional drawings: with handling, lifting and transport information.
•
EC declaration of conformity: indicates that the machines comply with current European directives.
•
Installation, use and maintenance manual: it contains the list of operations to carry out.
•
Wiring diagram: it is specific to the machine in question. It is useful for the persons who will have to carry out work
on the electrical system, as it shows the various components and connections.
•
Dimensional and lifting drawings
•
Assembly instructions for optional items: they describe the procedures for their installation on the machine.
•
EC declaration of conformity: indicates that the machines comply with current European directives.
•
Manual of the electronic controller
The instructions are also available in electronic format on the website
3.1.1
General safety regulations
The Manufacturer, during design and construction, has paid particular attention to aspects that may pose a risk to the safety
and health of people interacting with the machine. The manufacturer has complied with the applicable laws as well as the code
of good manufacturing practice. The purpose of this manual is to encourage users to take all due care and thereby avoid any
risks. In any case, prudence is required at all times. Safety is also the responsibility of all operators who interact with the machine.
Carefully read the instructions in this manual and those applied directly on the machine, and respect those concerning safety in
particular.
The inclusion of these machines in a system requires an overall project that must take into account all the "good practice"
requirements, as well as the legislative and regulatory provisions. Particular attention must be paid to all the recommendations
and technological information provided by the Manufacturer. Do not tamper with, avoid, remove or bypass the safety devices
installed on the machine. Failure to observe this requirement could result in serious risks to the health and safety of the persons
involved.
The personnel who carry out any kind of work during the entire life span of the machine must have precise technical knowledge,
special skills and recognised experience in the specific sector. Non-fulfilment of these requirements could endanger people's
health and safety.
Keep the area around the machine in a good state in order to avoid risks to the health and safety of persons during normal use
and maintenance of the machine.
Some processes may require the assistance of one or more helpers. In which case, these helpers must be duly trained and
informed of the type of work to be carried out in order to avoid risks to their health and safety.
When moving the machine, refer to the information provided on the instructions for use supplied by the manufacturer.
The personnel who carry out loading, unloading and handling of the equipment must have recognised skills and experience in
the specific sector and must have absolute command of the lifting equipment to be used.
During installation, observe the clearances indicated by the Manufacturer and take into account all the work activities carried
out in the vicinity. Installation must also be carried out in compliance with the laws in force on safety at work.
The machine must be installed and connected in accordance with the Manufacturer's instructions. The person in charge must
also take into account all regulatory and legislative requirements, carrying out all installation and connection operations in a
workmanlike manner.
After installation and before commissioning the machine, he must perform a general check to make sure that these requirements
have been met.
Check that any means of transport to be used for transfer of the machine are suitable for the purpose, and that the machine is
loaded and unloaded with care to ensure the safety of the operator and of any other persons who are directly involved. Before
transfer, make sure that the machine and its components are duly anchored to the vehicle and do not exceed the maximum
Installation, use and maintenance manual
https://www.melcohit.com/EN/download/
8
Advertisement
Table of Contents
