Table of Contents
Advertisement
1 GENERAL PROVISIONS
1.1 General information and safety
1.1.1
Scope of the manual
This manual, which is an integral part of the machine (1), was prepared by the Manufacturer to provide the necessary information
to all those who are authorised to interact with it during its life span: Buyers, System Designers, Carriers, Handling Operators,
Installers, Expert Operators, Specialist Technicians and Users.
As well as adopting a code of good practice, the recipients of the manual must read the information with care and apply it
scrupulously. Taking a little time to read this information can help avoid risks to the health and safety of persons as well as
prevent financial losses.
The information was written by the Manufacturer in the manufacturer's native language (Italian) and is referred to as the
"ORIGINAL INSTRUCTIONS". This information is also available into other languages as "TRANSLATION OF THE ORIGINAL
INSTRUCTIONS" to meet legislative and/or commercial requirements. The information is valid even if the machine in your
possession is not exactly the same as the one referred to.
Keep this manual in a known and easily accessible place to refer to as necessary.
The Manufacturer reserves the right to modify the product without prior notice.
A number of symbols are used to highlight some parts of the text that are of particular importance. These are described below.
(1) in the interest of clarity, this term is used as defined in the Machinery Directive.
Installation, use and maintenance manual
5
Advertisement
Table of Contents
