Mitsubishi Electric s-AIRME-G02 Instructions For Installation, Use And Maintenance Manual page 75

PCO photocatalytic oxidation sanitation system (additional section option)
The PCO accessory consists of a module containing a number of UV-C lamps depending on the air flow rate handled, which
by means of a photocatalytic oxidation process purify the air of microbial contamination and other impurities such as bacteria,
mould, allergens, organic and volatile compounds, odours, and ultra-fine dust, which cannot be captured by conventional
static filters.
Immersed electrode humidifier (additional section option)
If humidification is required indoors, there is an additional section available as an accessory that has an immersed electrode
steam generator connected to a steam distribution ramp located in the section for the supply of air. The section comes with a
drip tray. The delivered steam flow rate is calculated according to the size of the s-AIRME-G02/G07 unit and the power
consumption of the steam generator is defined in relation to this. Specific probes detect the humidity to allow the main controller
of the s-AIRME-G02/G07 to regulate the steam generator accordingly by means of a special 0-10V signal.
Humidity control can be for the flow of supply or return.
The section is designed for quick mechanical and electrical connection. In this case, the switchboard of the s-AIRME-G02/G07
is supplied with the power and protection parts required for use of the steam generator.
Before positioning and installation of the accessory, read the chapter "INSTALLING THE UNIT ON SITE". Follow all the
instructions so as not to cause malfunctioning or breakage of the unit.
The steam generator needs to be connected to the hydraulic circuit for the supply and draining of water; observe the instructions
in the user manual provided with the steam generator accessory.
Refer to the user manual of the steam generator for the specifications of the supply and draining of water.
The accessory is powered directly from the switchboard of the s-AIRME-G02/G07 unit.
See the chapter "JOINING THE SECTIONS" for the electrical and mechanical connection between the humidification section
and the s-AIRME-G02/G07 unit.
STEAM HUMIDIFIER (flow calculated for a dx = 2 g/kg THAT PERMITS
RHsupply = 50 % ALSO WITH AN EXTERNAL T OF = -5°C)
Size s-AIRME-G02/G07
Nominal production of steam [kg/h]
Power absorption [kW]
Current absorption [A]
Power supply [V]
Number of distributors
Diameter of distributors [mm]
Length of distributor [mm]
Construction specifications:
- Immersed electrode steam generator type KUE (SIZES 3000 to 7500) / UE***X (SIZES 10000 to 20000).
- Additional section with structure and panelling same as CTA.
- Additional section containing: condensate collection tank, steam distributor.
- Steam generator in a compartment of the additional section
Installation, use and maintenance manual
MODEL 3000 5000 7500 10000 12500 15000 20000
Weight (kg) 65 78
Length (mm)
3000
8
6
8.7
1
30
450
88 100 109 119
550
5000 7500 10000
15 18 25
11.2 13.5 18.7
16.2 19.5 27.1
3x400V 50/60Hz
1 1 1
30 30 40
650 850 1050
131
12500 15000
35 45
26.2 33.7
37.9 48.7
1 1
40 40
1250 1250
20000
65
48.7
70.4
2
40
1650
75