Sony HT-DDW840 Operating Instructions Manual page 54

Specifications (continued)
Inputs (Digital)
DVD/LD (Coaxial) Sensitivity:
Impedance: 75 ohms
S/N: 100 dB
(A, 20 ktIz LPF)
VIDEO 2 (Optical) Sensitivity:
Impedance: -
S/N: 100 dB
(A, 20 ktIz LPF)
Outputs
MD/I'APE (OUT), Voltage: 250 mV
VIDEO I Impedance: 10 kilohms
(AUDIO OUT)
SUB WOOFER Voltage: 2 V
Impedance: 1 kilohms
Tone
Gainlevels:
FM tuner section
Tuning range
Antenna terminals
£6 dB, 1 dB step
87.5 - 1!)8.0 MHz
75 ohms, unbalanced
Intermediate Frequency
10.7 MHz
Sensitivity
Mono: 18.3 dBf, 2.2 pV/75 ohms
Stereo: 38.3 dBf, 22.5 raV/75 ohms
Usable sensitivity 11.2 dBf, I pV/75 ohms
SIN
Mono: 76 dB
Stereo: 70 dB
Harmonic distortion at I kHz
Mono: 0.3%
Stel_o: 0.5%
Separation 45 dB at I kIlz
Frequency response
30 Hz 15 kttz,
+0.5/-2 dB
Selectivity
60 dB at 41X) kttz
AM tuner section
Tuning range
Models of area code U, CA
With 10-ktlz tuning scale: 530 - 1710 ktlz "i
With 9-kHz tuning scale: 531 - 1710kHZ 'i
Models of area code E2/E3, AR, MR
With 10:kttz tuning scale: 530 - 1610 kHz "i
With 9:kHz tuning scale: 531 - 1602 kHz "i
Models of area code SP, CEL, CEK
With 9-kHz tuning scale: 531 - 1602 kHz
Antenna Loop antenna
Intermediate Frequency
450 kItz
Usable sensitivity
50 dB/m (at 1,000 kHz or
999 kIlz)
SIN 54 dB (at 5!) mV/m)
Harmonic distortion 0.5 % (5!) mV/m, 40!) Hz)
Selectivity
At 9 ktlz: 35 dB
At I1) kHz: 40 dB
6) You can change the AM tuning scale to 9 kHz or
10 kIlz. After tuning in any AM s_ation, turn off
tile receiver. Hold down PRESET TUNING + and
press I/(_). All preset s_ations will be era.ted when
you change the [uning scale. To reset the scale to
10 kIlz (or 9 kIlz), repeat the procedure.
Video section
Inputs
Video: 1 Vp-p, 75 ollrrls
Outputs
Video: 1 Vp-p, 75 ohms
54c8