Sony HT-DDW840 Operating Instructions Manual page 42

Remote Button Description
(continued)
Remote Operations Function
Button
CLEAR DVD player Press if you made a
mistake when you press
the number button or
press _ relurn to the
continuous play etc.
SEARCH DVD player Select searching mode.
MODE Press to .select tbe unit for
search (track, index, etc.)
TOP MENU/DVD player Displays DVD title.
GUIDE
AV MENU VCR_atellite/ Displays menu.
tuner/
DVD player
d_ VCD player/ Returnsto theprevious
LD player/ menu or exits lhe menu.
DVD player
tl-/tJ,/<./_. VCR/Satellile Selects a menu item.
tuner/
DVD player
ENTER/ VCR_alellite Press to enter tbe
EXECUTE tuner/ selection.
DVD player
TV I/(_ TV Turns tbe TV on or off.
@_ TV Selects the channel
entry mode, either one
or two digit.
TV VOL TV Adjust lhe volume of lhe
+/ TV.
TV CH +/- TV Select preset TV
c]la!/nels.
TV/ TV Selects input signak TV
VIDEO input or video input.
WIDE TV Selects the wide picture
mode.
USE MODE Remote To set up lhe
AV 1 and Remote Select the command
AV2 mode of the remote.
SOURCE Remote Selects 2ND AV output.
ALT Remote Change remote key
function to activate those
but[ons with o_nge
printing.
Notes
• Some foncfions explained in this section may not
work depending on tbe model of the receiver.
• Tbe above explanation is intended to selwe as an
example only.
Therefore, depending on the component file above
operation may not be bossible or may operate
differently than described.
• The VIDEO 3, TV/SAT, PHONO, AUX, SOURCE,
MPX/DUAL, ANALOG DIRECT, 12 and ON
SCREEN _nctions are not available for set
operation.
Set the remote mode using the USE MODE
button and the remote mode buttons.
Selecting the command mode
You can switch the command mode (AVI or
AV2) of the remote. If the command mode of
the receiver and the remote is different, you
cannot use the remote to operate the receiver.
Press I (AV1) (or 2 (AV2)) while pressing
down USE MODE.
The indicator lights once (twice for AV2), then
the commaod mode switches.
To check the mode of the remote
Press USE MODE. You can check the remote
by the indicator.
Mode Indicator lights
AVI once
AV2 twice
To reset the remote to factory
settings
Press I/(_), AV I/(_), and MASTER VOL - at
the same time.
The indicator lights 3 times, then goes off.
42G8