Sony HT-DDW840 Operating Instructions Manual page 33

Presetting radio stations
1
Press TUNER.
The last received station is tuned in.
2
Tune in the station that you want to
preset using Direct Tuning (page 31) or
Automatic Tuning (page 32).
3 Press MEMORY.
"MEMORY" appears in the display for a
t_w seconds.
Do steps 4 to 6 before "MEMORY" goes
out.
4
Press SHIFT to select a memory page
(A, B or C).
Each time you press SHIFT, the letter "A",
"B", or "C" appears in the display.
5 Press PRESET TUNING +* or PRESET
TUNING -* to select a preset number.
If"MEMORY" goes out before you press
the preset number, st*wt again from s_ep 3.
6 Press MEMORY again to store the
station.
If"MEMORY" goes out before you can
store the station, start again fi'om step 3.
7
Repeat steps 2 to 6 to preset another
station.
* For models of al_a code CEL, CEK: PRESET/PTY
SELECT + or PRESET/PTY SELECT .
TO change a p_es_ number to
another station
Do steps I to 6 to preset a new station to the
number.
Tuning to preset stations
You can tune tbe preset stations by either of the
following two ways,
Scanning the preset stations
1
Press TUNER.
The last received station is tuned in.
2
Press PRESET TUNING +* or PRESET
TUNING -* repeatedly to select the
preset station you wahl
Each time you press the button, tbe receiver
tunes in one preset station at a time, in the
corresponding order and direction as
lbllows:
* For models of al_a code CEL, CEK: PRESET/PTY
SELECT + or PRESET/I:_rY SELECT .
Using the preset codes
Use the supplied remote to perform tbe
following operations. For details on the buttons
used in this section, see pages 39-45 for remote
RM-PP411 and pages 4_9 for remote
RM-U306.
1
Press TUNER on the remote.
The last received station is tuned in.
2
Press SHIFT to select a memory page
(A, B, or C), then press the preset
number of the station you want using
the numeric buttons.
=l
0
0
0
m
i
o
w
33GB