Sony HT-DDW840 Operating Instructions Manual page 36
Fm stereo fm-am receiver
Hide thumbs
Also See for HT-DDW840:
- Operating instructions manual (59 pages) ,
- Operating instructions (2 pages) ,
- Service manual (76 pages)
Advertisement
You can enter a name (index name) of up to 8
characters
for preset st_tions and program
sources. These names (tbr example,
"VHS')
_ppear in 1he receiver's
display when a station
or program source is selected.
Note that no
more than one name can be entered for each
preset st_tion or progr_un source.
This function
is useful for distinguishing
components
of the same kind.
For example,
two VCRs can be specified
_s "VHS" and
"SMM',
respectively.
It is also handy tbr
identifying
components
connected
to jacks
meant for _mother type of component,
for
example,
a second CD player connected
to the
MD/FAPE
jacks.
1
:o
name
a preset
station
Press TUNER.
The last station you received is tuned in.
If you are not familiar with how to tune in
preset stations, see "Tuning to preset
stations"
on page 33.
TO name
a program
source
Select the program source (component)
to be named.
2 Press NAME.
3 Create an index name by using MENU +
or MENU-and
MENU <(or MENU _> :
Press MENU + or MENU - to select a
ch*_racter, then press MENU > to move the
cursor to the next position.
TO insert
a space
Press MENU + or MENU - until _ blank
space *_ppears in the displ*_y.
|f you've
made
a mistake
Press MENU
<_ or MENU _> repeatedly
until the ch_racter
to be changed
flashes,
then press MENU + or MENU - to select
the right character.
4
Press ENTER.
5 Repeat steps 2 to 4 to assign index
name for another station or program
source.
Note
(Models
of area
code
CEL,
CEK only)
YOU cannot change tile name of an RDS station.
Before you begin, m;_ke sure you've connected
*dl components
properly.
Recording
on an audio tape
or MiniDisc
You can record on a cassette tape or MiniDisc
using the receiver.
See the operating
instructions
of your cassette deck or MD deck
if you need help.
1
Select the component to be recorded.
2 Prepare the component for playing.
For example,
insert a CD into the CD
player.
3 Insert a blank tape or MD into the
recording deck and adjust the
recording level, if necessary.
4
Start recording on the recording deck,
then start playback on the playback
component.
Notes
• Sound adjustments do not affect the signal output
from the MD/TAPE OUT jacks.
• When MULTI CH IN is selected, tile analog audio
signals of the ctlrrent function is otltpul from the
REC OUT jacks (HT=DDW840 only).
36c8
Advertisement
