Bottom View - Vivitek DX5630 Series User Manual

Bottom view

I L
TEM
1.
Tilt adjustor
2.
Ceiling support holes
Note:
When installing, ensure that you use only UL Listed ceiling mounts.
For ceiling installations, use approved mounting hardware and M4 screws with a maximum screw depth of 12
mm (0.47 inch).
The construction of the ceiling mount must be of a suitable shape and strength. The ceiling mount load
capacity must exceed the weight of the installed equipment, and as an additional precaution be capable of
withstanding three times the weight of the equipment over a period of 60 seconds.
ABEL
Rotate adjuster lever to adjust angle position.
Contact your dealer for information on mounting the projector on a
ceiling
D
ESCRIPTION
— 14 —
S :
EE PAGE
26