Table of Contents
Advertisement
Bottom view
2 1
154.5mm
[6.08"]
1
2
DX881ST/DW882ST Series
I
L
TEM
ABEL
1.
Ceiling support holes
2.
Tilt adjustor
Note:
When installing, ensure that you use only UL Listed ceiling mounts.
For ceiling installations, use approved mounting hardware and M4 screws with a maximum screw
depth of 6 mm (0.24 inch).
The construction of the ceiling mount must be of a suitable shape and strength. The ceiling mount
load capacity must exceed the weight of the installed equipment, and as an additional precaution
be capable of withstanding three times the weight of the equipment (not less than 5.15 kg) over a
period of 60 seconds.
45.5mm
[1.79"]
61.7mm
[2.43"]
132.7mm
[5.23"]
1
30.5mm
[1.20"]
Contact your dealer for information on mounting the projector on a
ceiling
Rotate adjuster lever to adjust angle position.
152.2mm
[5.99"]
2 1
D
ESCRIPTION
– 7 –
45.5mm
2 1
[1.79"]
154.5mm
30.5mm
[6.08"]
[1.20"]
DX813/DW814 Series
57.4mm
[2.26"]
128.4mm
[5.06"]
147.9mm
[5.82"]
1
S
EE PAGE
16
Advertisement
Table of Contents
