Table of Contents
Advertisement
Table 2. Events organized by severity (continued)
Message String
Event ID
FQXSPPP4029I
The server was automatically powered on because the power restore
policy is set to restore previous power state..
FQXSPPP4030I
The server was reset via Platform Event Filter.
FQXSPPP4031I
The server was power-cycled via Platform Event Filter.
FQXSPPP4032I
The server was soft reset.
FQXSPPP4033I
The server was powered up via Real Time Clock (scheduled power
on).
FQXSPPP4034I
The server was powered off for an unknown reason.
FQXSPPP4035I
The server was powered off by chassis control command.
FQXSPPP4036I
The server was powered off via pushbutton.
FQXSPPP4037I
The server was powered off when the watchdog expired.
FQXSPPP4038I
The server stayed powered off because the power restore policy is set
to always restore..
FQXSPPP4039I
The server stayed powered off because the power restore policy is set
to restore previous power state..
FQXSPPP4040I
The server was powered off via Platform Event Filter.
FQXSPPP4041I
The server was powered off via Real Time Clock (scheduled power
off).
FQXSPPP4042I
Management Controller [arg1] reset was initiated due to Power-On-
Reset.
FQXSPPP4043I
Management Controller [arg1] reset was initiated by PRESET.
FQXSPPP4044I
Management Controller [arg1] reset was initiated by CMM.
FQXSPPP4045I
Management Controller [arg1] reset was initiated by XCC firmware.
FQXSPPP4046I
Remote power permission is [arg1].
FQXSPPP4047I
Management Controller [arg1] reset was initiated by user [arg2].
FQXSPPP4048I
Attempting to AC power cycle server [arg1] by user [arg2].
FQXSPPP4049I
Management Controller [arg1] reset was initiated by Front Panel.
FQXSPPR2001I
[ManagedElementName] detected as absent.
FQXSPPU2001I
An Over-Temperature Condition has been removed on
[ProcessorElementName].
FQXSPPU2002I
The Processor [ProcessorElementName] is no longer operating in a
Degraded State.
FQXSPPU2007I
The System [ComputerSystemElementName] has detected a POST
Error deassertion.
FQXSPPW0001I
Power supply [arg1] in the enclosure (MTM-SN: [arg2])has been
added.
FQXSPPW0005I
[PowerSupplyElementName] is operating in an Input State that is out
of range.
FQXSPPW0008I
[PowerSupplyElementName] has been turned off.
Severity
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
.
Chapter 2
XClarity Controller events
15
Advertisement
Table of Contents
