Table of Contents
Advertisement
SNMP Trap ID: 1
CIM Prefix: PLAT CIM ID: 0523
User Action:
Information only; no action is required
• FQXSPPW2079I: Sensor [SensorElementName] has deasserted the transition to non-recoverable.
This message is for the use case when an implementation has detected that the Sensor transition to non-
recoverable has deasserted.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Critical - Voltage
SNMP Trap ID: 1
CIM Prefix: PLAT CIM ID: 0531
User Action:
Information only; no action is required
• FQXSPPW2101I: Redundancy Degraded for [RedundancySetElementName] has deasserted.
This message is for the use case when Redundancy Degraded has deasserted.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Warning - Redundant Power Supply
SNMP Trap ID: 10
CIM Prefix: PLAT CIM ID: 0805
User Action:
Information only; no action is required.
• FQXSPPW2104I: Non-redundant:Sufficient Resources from Redundancy Degraded or Fully
Redundant for [RedundancySetElementName] has deasserted.
This message is for the use case when a Redundancy Set has transitioned from Non-redundant:Sufficient
Resources.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Warning - Redundant Power Supply
SNMP Trap ID: 10
CIM Prefix: PLAT CIM ID: 0807
User Action:
Information only; no action is required.
• FQXSPPW2110I: Non-redundant:Insufficient Resources for [RedundancySetElementName] has
deasserted.
This message is for the use case when a Redundancy Set has transitioned from Non-redundant:
Insufficient Resources.
Severity: Info
Serviceable: No
100
ThinkSystem SR670 Messages and Codes Reference
Advertisement
Table of Contents
