Table of Contents
Advertisement
Table 2. Events organized by severity (continued)
Message String
Event ID
FQXSPBR4004I
Server timeouts set by user [arg1]: EnableOSWatchdog=[arg2],
OSWatchdogTimout=[arg3], EnableLoaderWatchdog=[arg4],
LoaderTimeout=[arg5].
FQXSPBR4005I
Management Controller [arg1]: Configuration saved to a file by user
[arg2].
FQXSPBR4006I
Management Controller [arg1]: Configuration restoration from a file by
user [arg2] completed.
FQXSPBT0007I
No bootable media available for system
[ComputerSystemElementName].
FQXSPCA2002I
Numeric sensor [NumericSensorElementName] going low (lower
critical) has deasserted.
FQXSPCA2007I
Numeric sensor [NumericSensorElementName] going high (upper
non-critical) has deasserted.
FQXSPCA2009I
Numeric sensor [NumericSensorElementName] going high (upper
critical) has deasserted.
FQXSPCA2011I
Numeric sensor [NumericSensorElementName] going high (upper
non-recoverable) has deasserted.
FQXSPCA2015I
Sensor [SensorElementName] has deasserted the transition from
normal to non-critical state.
FQXSPCA2017I
Sensor [SensorElementName] has transitioned to a less severe state
from critical.
FQXSPCA2019I
Sensor [SensorElementName] has deasserted the transition to non-
recoverable from a less severe state.
FQXSPCN4000I
Serial Redirection set by user [arg1]: Mode=[arg2], BaudRate=[arg3],
StopBits=[arg4], Parity=[arg5], SessionTerminateSequence=[arg6].
FQXSPCN4001I
Remote Control session started by user [arg1] in [arg2] mode.
FQXSPCN4002I
User [arg1] has terminated an active console session.
FQXSPCN4003I
Remote Control session started by user [arg1] in [arg2] mode has
been closed.
FQXSPCR2001I
Sensor [SensorElementName] has deasserted the transition to non-
recoverable from a less severe state.
FQXSPDA2000I
The System [ComputerSystemElementName] has detected a POST
Error deassertion.
FQXSPDM4000I
Inventory data changed for device [arg1], new device data hash=
[arg2], new master data hash=[arg3] .
FQXSPDM4001I
Storage [arg1] has changed.
FQXSPDM4003I
TKLM servers set by user [arg1]: TKLMServer1=[arg2] Port=[arg3],
TKLMServer2=[arg4] Port=[arg5], TKLMServer3=[arg6] Port=[arg7],
TKLMServer4=[arg8] Port=[arg9].
FQXSPDM4004I
TKLM servers device group set by user [arg1]:
TKLMServerDeviceGroup=[arg2] .
FQXSPDM4005I
User [arg1] has generated a new encryption key pair and installed a
self-signed certificate for the TKLM client.
8
ThinkSystem SR670 Messages and Codes Reference
Severity
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Advertisement
Table of Contents
