Table of Contents
Advertisement
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0248
User Action:
Information only; no action is required
• FQXSPSE4050I: [arg1] sent IPMI command from [arg2], raw data: [arg3][arg4][arg5].
This message is for the use case where IPMI command to be sent.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0251
User Action:
Information only; no action is required
• FQXSPSE4059I: User [arg1] password modified by user [arg2] from [arg3] at IP address [arg4].
A user account was changed by user
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0269
User Action:
Information only; no action is required.
• FQXSPSR0001N: Sensor [SensorElementName] has transitioned to non-recoverable from a less
severe state.
This message is for the use case when an implementation has detected a Sensor transitioned to non-
recoverable from less severe.
Severity: Error
Serviceable: Yes
Automatically notify Support: No
Alert Category: Critical - Hard Disk drive
SNMP Trap ID: 5
CIM Prefix: PLAT CIM ID: 0524
User Action:
Using XCC web or LSA or Storcli to check the status of every virtual disk on your system, resolve the
problem on the problematic virtual disk(s).
• FQXSPSR2001I: Sensor [SensorElementName] has deasserted the transition to non-recoverable
from a less severe state.
.
Chapter 2
XClarity Controller events
121
Advertisement
Table of Contents
