5.2.11 Storing of the remote control
The remote control can be stored safely at the back of the
appliance. The integrated magnet is holding it into place.
Fig. 18
6
Cleaning and maintenance
Before cleaning or maintenance, turn the appliance off by
pressing the
button, then unplug the power supply cable.
6.1
Cleaning the housing
The appliance shall be cleaned with an oil-free cloth or a slightly
damp cloth (damped with water or a solution of warm water and
mild liquid detergent). Then, it should be dried with a dry cloth.
Be sure to wring excess water from the cloth before wiping
around the controls. Excess water in or around the controls may
cause damage to the appliance.
For safety reasons, never wash the appliance with water.
Cool 4000 – 6721875493 (2023/09)
▶ Never use harsh cleaners, petrol, alcohol, solvents, wax or
polish to clean the appliance.
▶ Never spray insecticide liquids or similar.
6.2
Cleaning the filter
To maintain the efficiency of the appliance, it is recommended
to clean the dust filters regularly. The frequency depends on the
duration and conditions of operation. If the appliance is used
frequently, it is recommended to clean the filters every 2
weeks.
Upper filter removal
The upper filter is integrated in the upper grid.
▶ To remove, simply push the grid out of the housing. Then,
pull it vertically up.
0010047636-001
Fig. 19
Cleaning and maintenance
CAUTION
1.
Upper filter removal
2.
0010047637-001
17