Icons On The Display Screen And Their Display Function; Switching On/Off - Bosch Cool 4000 Installation And Operating Instructions Manual

Operation
No. Button
[6] Fan speed
selection
button
[7] Mode selection
button
[8] Down/
Decrease
button
[9] Swing button
[10 Up/Increase
] button
[11 Auto mode
] button
Table 6 Button names and functions
5.2.4 Icons on the display screen and their display
function
2
1
8
Fig. 17 Display screen of the remote controller
No. Name Display function
[1] Timer Displays the selected timer setting
and if the timer is on/off
[2] Fan speed Displays the current fan speed
(SPEED + AUTO or I (low) or III
(medium) or IIIII (high)
14
Function
Adjust the fan speed setting
Set operating mode (air
conditioning,
dehumidification, fan)
Adjust the temperature setting
or timer (programmed time)
downwards
Turn on/off the air outlet flap
swing function. The flap will
swing up and down.
Adjust the temperature setting
or timer (programmed time)
upwards
Turn on the auto mode
3
4
5
6
7
0010047572-001
No. Name Display function
[3] Operation Indicates that the appliance is
running
[4] Temperature Displays the selected temperature
scale scale
[5] Temperature Displays the current temperature
display setting (in Air conditioning modes)
or the room temperature (in
Dehumidification and Fan mode).
[6] Operating mode Displays the current operating
mode:
•
•
•
[7] Smart select Displays the smart cool select modes
modes (AUTO, SLEEP, SILENT)
[8] Swing function Indicates that the swing function is
active
Table 7 Icons and their display function

5.2.5 Switching ON/OFF

▶ Insert the plug of the appliance in the power socket.
▶ Press to switch on the appliance.
The appliance starts operating in the same mode and settings
as when it was turned off.
▶ Press to put the appliance in stand-by.
The display will shut down.
Note:
• For optimum performance of the appliance, leave a door/
window slightly open (as little as 1 cm) to guarantee proper
ventilation.
• Keep curtains away from the air inlet or air outlet.
• Never turn off the air conditioner by simply pulling the
plug.Press the button in order to put your air conditioner in
stand-by and wait a few minutes before pulling the plug. In
this manner, the appliance can perform the operating
status checks.If you turn the air conditioner off and
immediately restart it, allow four minutes for the
compressor to restart cooling. There is an electronic device
in the appliance that keeps the compressor turned off for
four minutes for safety.
Cool 4000 – 6721875493 (2023/09)
COOL (Air conditioning mode)
DRY (Dehumidification mode)
FAN