Table of Contents
Advertisement
USING THE CALENDAR DISPLAY FEATURE
The calendar can be recorded on your tapes to act as a handy reference when viewing them at a later time. Use the
following procedure to set up this display for the current date and time.
1. Load the Camera
l
Recorder's
date/
clock battery (Ac-
cessory
No.
8) as described on page
3.
2.
Turn on Power of Camera
l Recorder.
The clock and date graphics appear in the Viewfinder
and the first "1" flashes.
01
01
86
3. Press "SET" Button to select correct hour.
When
the correct hour
appears,
press "SHIFT" Button.
.
~ ~
10.P •
.o
AM
01
.
0186
4. Repeat Step 3 to select minute, AM
/
PM, month, day
and year.
1 0
09
30
1 9
5. Press "START/STOP" Button to activate the
date/
clock
.
19
The clock graphics disappear and the date graphics
rema
in.
"START/STOP" Button
"SET" Button
"SHIFT" Button
6. Press "DATE" Button on the side of Camera
Recorder to remove the date display from the
viewfinder.
The
date/
clock will continue to keep the
correct time in memory.
NOTE: To correct
date/
clock information during pro-
gramming, press "START/STOP" Button twice and
press "SHIFT" Button until the incorrect digit is
flashing.
Then use "SET" Button to enter the correct
digit.
If you wish to correct information after starting
the date/clock, first press the "DATE" Button to
display the date graphics, then press "START/STOP"
and repeat Steps 3 through 6 at left.
The date graphics will be recorded whenever they
appear in the
viewfinder.
To display date press
"DATE"
.
Pressing "DATE" again removes graphics .
J
Advertisement
Table of Contents
