Table of Contents
Advertisement
USING THE POWER ZOOM FEATURE
• Press Power Zoom Switch on the "W" side, and the picture gradually
widens.
Power Zoom Switch
•
Press Power Zoom Switch on the "T" side, and the picture gradually
becomes telescopic
.
NOTE: Do not touch the Zoom Lever or
USING THE MACRO FEATURE
It permits you to shoot objects as close as 1 cm from
the lens tip
.
1. Set
"FOCUS
AUTO
/
MANUAL"
Switch
to
"MANUAL"
position
.
2. Turn the Zoom Lever to "MACRO" while pressing
"MACRO" Switch.
3. Turn the Zoom Ring within the "MACRO" range
(green line on the Zoom Ring) for focusing
.
Zoom Ring during power zooming.
Zoom lever
"FOCUS AUTO/
MANUAL" Switch
USING THE INSTANT REVIEW FEATURE
1. In record
/
pause (stand-by) mode, press "REVIEW"
Button, and the recorded scene of the last few
seconds is played back in the reverse direction and
then played back in the forward direction
.
"REVIEW" Button
2. When the tape reaches the end of the scene you
have just recorded, the Video Camera
l
Recorder
returns to the record
/
pause (stand-by) mode.
Recording starts again when the Record
Start/
Stop
Button is pressed again.
Record Start/Stop Button
18
Advertisement
Table of Contents
