Table of Contents
Advertisement
HEAD CLEANING
• Picture playback may become blurred or be interrupted. This does not mean that the recorded program has been
erased.
• Dirt accumulated on the head after long periods of use causes this
problem.
In this
case,
head cleaning requiring
highly technical care is
necessary.
• For head cleaning, consult the nearest dealer or VTR Service Center for recommendations.
PERIODIC MAINTENANCE
The Video Camera
l
Recorder is a precision electromechanical device which will require periodic maintenance after a
period of normal use. We expect that no maintenance other than head cleaning will be required during the warranty
period by most users, unless the Video Camera
l
Recorder is heavily used or seldom used. Normal maintenance is the
responsibility of the user, although defective parts are covered during the warranty period
.
Consult your VTR Service
Center to determine recommendations for normal maintenance based on your location, hours of use and age of Video
Camera
l
Recorder.
SPECIFICATIONS
• General
Power requirements
Power consumption
Dimensions
Weight
• Video Recorder Section
Format
Heads
Video signal
Tape speed
Video input
Video output
Audio input
Audio output:
Fast forward
/
rewind time
• Camera Section
Scanning
29
Required minumum illumination
Image Sensor
L~ns
diameter
7.2V DC
6.5 watts (nominal)
4-15/16"(W) x 5-3
/
S"(H) x 12-1/16"(0)
126(W) x 136(H) x 306(D) mm
3.2 Ibs (1.45 kg)
Smm
Two video record/ playback heads; one flying erase head
EIA standard NTSC color
SP mode: 14.3
mm/
sec .; LP mode: 7.2
mm/
sec
.
(playback only)
1.0 Vp-p, 75 ohm
1.0 Vp-p, 75 ohm
-7.S dBs (316 m Vrms), more than 47K ohms
-7 .S dBs (316 m Vrms), less than 1.5K ohms
Approx.
6 minutes with P6-120 cassette
525
Iines/
60
fields/
30 frames
7 lux
2/
3" solid state MOS Imager
52 mm
Advertisement
Table of Contents
