Using The Time Remaining Feature; Tape Dubbing - Pentax MOVIE 8 PV-C800A Instruction Manual

USING THE TIME REMAINING FEATURE
When the tape counter is present in the viewfinder,
pressing "MODE" Button will change the display to a
read-out showing the amount of recording time left on
the tape. Pressing "MODE" Button again clears all
graphics from the viewfinder.
TAPE DUBBING
"RESET" Button
"MODE" Button
CI·
lGU
If you wish to exchange or copy some of your friend's favorite home recordings, the following instructions can be
used to connect one VTR to another for this purpose.
VTR: Record ANT
To
"VIDEO IN"
Audio/Video Cable
(Optional)
To
Audio/Video
Output Cable
(Optional)
"AUDIO IN"
Cameral
Recorder: Play
RF Converter Unit (Accessory No.2)
To "VIDEO OUT"
and "AUDIO OUT"
1. Connect the Audio / Video Connector Cal:1le (Op-
tional) to "VIDEO OUT" and" AUDIO OUT" on the
RF Converter Unit.
2. Connect the other ends to "AUDIO IN", "VIDEO
IN" on other VTR respectively.
3. Connect the Connector Cable from RF Converter to
"A/V" on
Camera l
Recorder.
4. Play the tape on
Camera l
Recorder and rec6rd it on
VTR.
NOTE: If you playa tape with a VTR and record it with
your
Camera l
Recorder, Connect the "VIDEO IN"
I
"AUDIO IN" of RF Converter Unit to "VIDEO OUT"I
"AUDIO OUT" of VTR.
26