Table of Contents
Advertisement
5. Press the softkey below the feature you want to place on (or remove from)
an available Feature button, for example, SAC to add or remove send all
calls. Selecting certain features may prompt you to enter a number such as
a telephone number, extension or trunk code to be associated with the
button you select in the next step.
NOTE:
Some already-programmed features, for example, call appearances, cannot
be changed from your phone; if you attempt to change one of these
features, your phone beeps once and the message "Press button to
program" remains displayed.
6. Press the Line/Feature button you want to assign to the selected feature.
If the feature is successfully administered, the display shows "Button
Programmed." If the button pressed already has a feature associated with
it, the display shows the programmed feature description and provides you
with the option of keeping it as programmed or replacing it with the
selection made in Step 6.
7. Choose one of the following options:
If you want to
Program
another button
after receiving
the "Button
Programmed"
message
Replace the
feature shown
Keep the
feature as
programmed
Delete the
feature from
the button
selected in
Step 6 and
leave it blank
Exit the
self-adminis-
tration function
5-18
Issue 1 July 2001
Then
Press the softkey below Cont (Continue) on the
second line of the display. Repeat this procedure
from Step 4.
Press the softkey below Replace.
The display reverts to the first Select Feature menu.
Press the softkey below Keep.
The display confirms the button has not been
reprogrammed.
Press the softkey below Delete.
The message "Button Programmed" displays.
Press Exit to return to the default (date/time) display
and normal call-handling mode.
Advertisement
Table of Contents
