Miele KM 3034-1 Operating And Installation Instructions page 9


For safety reasons, this cooktop may only be used after it has
been built in.

This appliance must not be installed and operated in mobile
installations (e.g. on a ship).

Never open the casing of the cooktop.
Touching or tampering with electrical connections or components
and mechanical parts is highly dangerous to the user and can cause
operational faults.

The manufacturer's warranty will be invalidated if the appliance is
not repaired by a Miele authorised service technician.

Faulty components must only be replaced by genuine Miele spare
parts. The manufacturer can only guarantee the safety of the
appliance when Miele replacement parts are used.

The cooktop is not intended for use with an external timer switch
or a remote control system.

The connection to the gas supply must be carried out by a
suitably qualified and competent gas fitter in accordance with
current local and national safety regulations (see "Installation – Gas
connection"). In Australia and New Zealand, gas installations must
be in accordance with AS/NZS 5601. If the plug has been removed
or the connection cable is not supplied with a plug, the appliance
must be connected to the mains supply by a suitably qualified
electrician.

If the mains connection cable is damaged, it must be replaced
with a special mains connection cable by a qualified and competent
electrician in order to avoid a hazard (see "Installation - Electrical
connection").
Warning and Safety instructions
9