MTPro operation manual
4.3.5Measure Setting Area
Figure 4-7Measurement setting
Auto Focus——it will auto focus every measure when it is checked.
Measure Task——measure task can be changed by selecting click
Edit——the measure tasks can be edited by this button
Description——the information of the connector can be input in this area and could be
saved in data and report.
ID——shows the ID of the connector
AutoInc——the ID could auto increase when it is checked
File Name——it shows the test file name of the files
Save Data——save or not save data
Save Report——save or not save report
Open Data——Open Last Data
Open Report——Open Last Report
Process bar——shows the process of measurement.
20