µ-Dimension MTPro Operation Manual page 35

Introduction
Dear customer：
Thank you for choosing MTPro product. MTPro product has high quality and excellent
performance. To make full use of this product, please read this manual carefully before using.
Whenever you have any questions, please contact us and we are happy to support.
Symbols
The following symbols are used for the important information in this manual.
Remarks
The notice and restrictions in the process.
Attention
1. The manual could be upgraded without further notice. Please kindly understand.
2. As far as possible, the content of this manual is accurate. However, if there is anything
erroneous or ambiguous, please contact us.
Considerations about the product
1.After warming up for 1 hour, use it;
2. Make sure the environment is dry and the temperature is normal.
3. Please be careful when moving the machine.
4. Do not use the instrument in high vibration environment.
5. Clean the fixture hole.
6. Make sure the fixture can hold the connector, if it is too loose, you must fasten the screw in the
lock handle.
7. Please cover the machine when not in use.
8. Do not change the power supply; you can only use the power adapter provided by Dimension.
1
MTPro operation manual