µ-Dimension MTPro Operation Manual page 40

MTPro operation manual
SCFixture LCFixture
We are providing three positioning piece such as SC/APC, LC/APC, FC/APC type and can
test most single fiber connectors. The 2.5mm fixture can test connectors such as FC/PC,
SC/PC, ST/PC, E2000/PC, DIN, FC/APC, SC/APC. The 1.25mm fixture can test connectors
such as LC/PC, MU/PC, LC/APC.
We can also customize the fixtures and provide technical support if the customer has special
needs.
3.High Efficient Software Interface
MTPro has simple and efficient interface. The software is very easy to use and you can
change the language of the interface by yourself.
The interface of the calibration now has guide mode and indicates with pictures of next
move. There is no need to adjust the machine calibration by users. The system will calibrate
automatically and give the result of calibration.
After calibration, the operator can start measurement just click on the Measure button on
main interface. The software will analyze the product and judge the result. The endface will
show by 3D, 2D and plot images. The software generates the data and report automatically
in excel format.
4.Easy Installation
MTPro interferometer only needs power cable and one USB 3.0 datalink to connect to
computer.
The fixture has screws to lock the fixture and no need to adjust by hand after installation.
6