Champion CHVK220 User Manual page 3

FEAUTURES
1. Spout
2. Base station
3. Water level
4. Lid
5. Release button for the lid
6. Handle
7. On/Off switch
8. Indicator light
USE
1. Place the machine on a flat surface.
2. Open the kettle by pressing the release button on the handle. Then fill in some water. The
water level can be read off using the water level indicator on the kettle. The water level must be
between the MIN. and MAX. marks!
3. Close the lid, you will hear a click when its correctly closed.
4. Place the kettle onto the base station.
5. Switch the kettle on by pressing the on/off switch down, its located below the handle. The indica
tor light turns on.
6. The kettle switches off automatically when the water has boiled. Now disconnect the base sta
tion from the mains power supply. Always hold the lid closed when pouring the water out.
Beware of scalding!
CLEANING
· Always pull out the plug from the socket before cleaning!
· The exterior of the machine should be cleaned, if necessary, with a slightly damp cloth without
additives.
· The interior can be cleaned by following these steps:
1. You will need 1 lemon.
2. Slice lemon in thin slices or use 1 dl freshly pressed lemon juice.
3. Mix lemon and water in the kettle to the MAX mark.
4. Turn on the kettle.
5. Pour out lemon/water mix and then rinse with cold water.
EN
2