Advertisement
FIT AND SECURE
2
2.7
2.8
2.9
LATR001_REV_A00
C
11
1
8
9
12
10
11
14
15
12
13
Secure the Bottom Mount Bracket (Item 11)
to the Tail Gate with M6 x 16 Button Head
Bolts, M6 x x20 x 2 Flat Washers and M6
4mm
Nyloc Nuts (Items 16, 17 & 13)
10mm
13
17
16
Clean area thoroughly with alcohol.
Remove the backing tape of the self-adhe-
sive tape on the Ladder Top Bracket (Item1)
and hook the Ladder Assembly over the
Tail Gate top edge. Align the ladder on the
Denatured
mark made earlier, take care not to let the
Alcohol
adhesive tape touch the roof. Once aligned,
angle the ladder down and firmly press the
top down onto the tailgate top.
Heat Gun
(Cold Climate)
Secure the Ladder assembly to the Bottom
Mount Bracket (Item 11) as shown.
Use the M6 x 40 Button Head Bolt and
Standard Nut (Items 8 & 15) in the middle
10mm
hole and start the clamping process, then
use the M6 x 25 Button Head Bolts, M6 x
19 x1 Flat Washers, M6 Nyloc Nuts and
Aluminium Spacers (Items 9, 12, 13 & 10)
4mm
in the other two holes. Remove the M6 x 40
Button Head Bolt and standard Nut.
Place M6 Nut Caps (Item 14) over M6 Nyloc
Nuts (Item 13).
5
Note: With the backing removed, heat
up the self-adhesive tape with a heat
gun before fixing it in place. This is
especially important in colder climates.
© 2023 FRONT RUNNER VEHICLE OUTFITTERS
Advertisement
