Advertisement
FIT AND SECURE
2
2.1
2
2.2
3
2.3
LATR001_REV_A00
13
19
2
6
19
13
14
4
2
2
13
14
1
10mm
4mm
10mm
18
4mm
Torx
T30
Anti-
Seize
10mm
19
4mm
11
3
Loosely assemble two Ladder Side Profiles
(Item 2) to the Ladder Top Step Bracket
(Item 1) using the M6 x 16 Flange Button
Head Bolts and M6 Nyloc Nuts (Items 19 &
13).
Note Side profile orientation. The ladder
rungs are closer to the middle of the
ladder.
Top Side Profiles: Distance from Rung to
Top of Side Profile is longer.
Bottom Side Profiles: Distance from
Rung to Bottom of Side Profile is longer.
Apply a little Anti Seize / oil on Thread
Forming Screws before inserting. Note
these are thread forming screws.
Secure the Ladder Rungs (Item 6) to the
Ladder Side Profiles (Item 2) using M6 x 25
Thread Forming Screws (Item 18). Join Side
Profiles with Side Joiner Outer Plate and
Side Joiner Inner Plate (Items 3 & 4) using
M6 x 16 Flange Button Head Bolts and M6
Nyloc Nuts (Items 19 & 13). Fully Tighten all
Fasteners.
Tightening Torque 8-10Nm /
5.9 ft lb - 7.38 ft lb. Take care when
using a cordless driver.
Place M6 Nut Caps (Item 14) over all Nyloc
Nuts.
Secure the Bottom Mount Bracket to the
Ladder Side Profiles (Items 11 and 2) using
M6 x 16 Flange Button Head Bolts and M6
Nyloc Nuts (Items 19 & 13). Fully Tighten all
Fasteners.
Place M6 Nut Caps (Item14) over all Nyloc
Nuts.
© 2023 FRONT RUNNER VEHICLE OUTFITTERS
Advertisement
