Advertisement
FIT AND SECURE
2
2.4
2.5
2.6
11
LATR001_REV_A00
C
C
C
C
Loosen and remove the Right Hand OEM Bolt
on the Left Hand side Hinge on the inside of
the tailgate. Attach the Hinge Bracket (Item
7) to act as a guide for the placement of the
ladder.
Align the Ladder with the Hinge Bracket and
mark the top position with Masking Tape
and a marking pen.
Making sure it is level, mark the Bottom
position of the ladder with masking tape.
Remove the Ladder assembly.
Open the Tail Gate and remove the plastic
Liner to reveal the metalwork.
Place the U-Channel Rubber (Item 22) over
the door edge where the Bottom Mount
Bracket (Item 11) will be secured.
Align the Bottom Mount Bracket (Item 11)
with the markings made in Step 2.5. Lay
down some Masking Tape.
4mm
Mark the hole centers (C) as shown. Drill a
7mm
4mm Pilot hole and open up to 7mm.
Apply Anti-Rust on drilled holes.
Anti-
Rust
22
4
Denatured
Alcohol
© 2023 FRONT RUNNER VEHICLE OUTFITTERS
Advertisement
