Miele TWL 780 WP Operating Instructions Manual page 89

5. Change the door hinge on the door
The door hinge is secured to the door
with 2 angled rods. These rods need
to be removed with a screwdriver or
pointed pliers.
 Insert the end of the screwdriver
blade under the rod  and rotate it
so it is in an upright position. Do the
same to the other rod.

 Use the screwdriver or pointed pliers
to guide first one then the other
rod  to the middle until each can be
removed.

Useful tip: In some circumstances, the
rods can be difficult to dislodge.
Moving the screwdriver with a levering
action while pulling at the same time
may help to work the rods free.
 Remove the door hinge and rotate it
180°.
 Refit the door hinge on the opposite
side of the door.

 Secure the door hinge with the two
rods .
 Position the tip of the screwdriver
under the end of the rod and then
push it into its resting position .
Installation

89