End Of Programme - Unloading The Drum; At The End Of The Programme; Removing The Laundry - Miele TWL 780 WP Operating Instructions Manual

Heat pump tumble dryer
Hide thumbs Also See for TWL 780 WP:
Table of Contents

Advertisement

At the end of the programme

The programme is finished when
Anti-crease
,
Finish/Cooling down
appears in the display. The Start/Add
laundry sensor light goes out.
The dryer will switch off automatically
15 minutes after the end of the Anti-
crease phase (or 15 minutes after the
programme with programmes without
an Anti-crease phase).

Removing the laundry

Only open the door when the drying
process has finished. Otherwise, the
laundry will not be properly dried and
cooled down.
 Pull the door open at the side with
the orange marker.
 Remove the laundry.
Always remove all items from the
drum.
Items left in the dryer could be
damaged by overdrying when the
dryer is used the next time.
 Turn the programme selector to the 
position.

6. End of programme - unloading the drum

Finish/
or
Finished
 Remove the fluff from the 2 fluff filters
in the door opening (see "Cleaning
and care - Fluff filters").
 Shut the door with a gentle swing.
 Empty the condensed water
container.
We recommend that you drain the
condensed water externally through the
drain hose when drying a full load using
the Cottons and Cottons 
programmes. This will avoid having to
empty the condensed water container
during the programme.
Drum lighting
When you open the door of the tumble
dryer, the drum is illuminated along with
the area immediately in front of the
dryer. This prevents you from
accidentally leaving behind any items in
the drum or in your laundry basket.
The drum lighting will go out
automatically to save energy.
39

Advertisement

Table of Contents
loading

Table of Contents