Table of Contents
Advertisement
SmartStart
The SmartStart function (only
functional in selected countries) lets
you define a time period during which
your tumble dryer will start
automatically. The machine will start
on receipt of a signal, e.g. from your
energy supplier, that indicates that the
electricity rate is particularly
economical.
This function is active when the
SmartGrid
setting is switched on.
The timeframe can be defined between
15 minutes and 24 hours. During this
period, the tumble dryer waits for the
signal from the energy supplier. If no
signal is sent during the defined period,
the tumble dryer starts the drying
programme.
Setting the timeframe
If you have activated the
function in Settings, touch
SmartGrid
the sensor to set the timeframe in
which your tumble dryer should be
started automatically (see "Settings –
SmartGrid").
The procedure for setting this is the
same as for setting the time for Delay
start.
Use the sensors to enter the
hours and confirm your entry with the
OK sensor.
The hours will be saved and the minute
number block will be highlighted.
Use the sensors to enter the
minutes and confirm your entry with
the OK sensor.
4. Selecting programme settings
Press the Start/Add laundry sensor to
start the drying programme with
SmartStart.
The following will appear in the display:
SmartStart
37
Advertisement
Chapters
Table of Contents
