Table of Contents
Advertisement
Control panel
a Display
The following values are shown in
the display and/or selected from it:
1. The programme names, the drying
level and the duration of the
selected programme.
2. The individual values of the
selection lists for settings.
b Sensor controls for Extras
You can select Extras to augment
the drying programmes.
When a drying programme is
selected, the sensor controls for the
possible Extras light up dimly.
c Control panel
The control panel consists of a
display and various sensor controls.
The individual sensors are explained
in the following.
d Sensor controls
Values shown in the display can be
changed with the sensors. The
sensor increases the value or
moves the selection list up; the
sensor decreases the value or
moves the selection list down.
Operating the tumble dryer
e OK sensor
Confirm selected values with the OK
sensor.
f sensor controls
The sensor starts the Delay start
function. With Delay start you can
delay the start of a programme. The
start of the programme can be
delayed from 15 minutes up to a
maximum of 24 hours. This allows
you to make use of night-time
economy electricity rates, for
example.
Further information can be found in
"4. Selecting programme settings".
g sensor
You can use the sensor to call up
an energy consumption forecast for
the selected drying programme.
See "Energy saving tips - Feedback"
for more information.
19
Advertisement
Chapters
Table of Contents
