4. Selecting programme settings
Delay start/SmartStart
Delay start
With Delay start you can delay the
start of a programme.
This function is active when the
is switched off.
SmartGrid
The hours can be set from
The minutes can be set in 15 minute
increments from
Setting the Delay start time
Touch the sensor.
The following will appear in the display:
Start in
Set the hours with the sensors.
Confirm with the OK sensor.
The display will change:
Start in
Set the minutes with the sensors.
Confirm with the OK sensor.
Useful tip: The values will count
upwards and downwards automatically
if you keep your finger on the or
sensor control.
Altering Delay start
The selected Delay start time can be
changed before the programme starts.
Touch the sensor.
Change the specified time and
confirm with the OK sensor.
36
to
00
24
to
.
00
45
00
:00
h
06:
45
h
Cancelling Delay start
The selected Delay start time can be
cancelled before the programme starts.
Touch the sensor.
The selected Delay start time will
appear in the display.
Set a time value of 00:00
.
sensors. Confirm with the OK
sensor.
The selected Delay start time has been
cancelled.
After the programme has started, the
selected Delay start time can only be
changed or cancelled by interrupting
the programme.
OK
Starting Delay start
Touch the Start/Add laundry sensor
to start the Delay start function.
Adding laundry during ongoing timer
period
OK
Follow the instructions in the sections
"Changing the programme sequence"
and "Adding or removing laundry".
h
with the