Bluetooth Connection; Play; Power-On/Auto Standby/Auto Wakeup - Harman JBL CINEMA SB180 Owner's Manual

5.2 Bluetooth connection

Through Bluetooth, connect the soundbar with your
Bluetooth device, such as a smartphone, tablet and
laptop.
Bluetooth connection
Through Bluetooth, connect the soundbar with your Bluetooth
device, such as a smartphone, tablet and laptop.
1-Press STANDBY button on the remote control to power on
the sound bar
2- To select a Bluetooth signal source, press the [
on the remote control, or on the bar, until the word "no bt"
appears on the bar display, the soundbar is ready to pairing
the bluetooth signal.
3- On your Bluetooth device, enable Bluetooth and search for
"CINEMA SB180", input the password 0000 if need the
password prompt, the sound bar will synchronize to play
songs on your device as long as the word "bt" remains solid
and a beep will be heard, which means that the connection
was successfully.
Disconnected the bluetooth on the device to switched off the
bluetooth connection.
Notes:
The Bluetooth connection will be lost if the distance
●
between the soundbar and Bluetooth device exceeds 33 ft
(10 m).
The CINEMA SB180 model is not excluded from your list
●
of connections on your device.
In bluetooth mode, [PLAY/PAUSE],[NEXT], [PREVIOUS],
●
[VOLUME+/-] etc. are also active.
Electronic devices may cause radio interference. Devices
●
that generate electromagnetic waves must be kept away
from the soundbar, such as microwaves and wireless LAN
devices.
CINEMA SB180
] button

6 PLAY

6.1 Power-on/Auto standby/Auto wakeup

Switch on
1. Connect the soundbar and subwoofer to power by using
the supplied power cords.
2. Press to switch on.
→ The subwoofer is connected to the soundbar automatically.
Connected: The connection status indicator turns solid blue.
NOTES:
− Use the supplied power cord only.
− Before switching on the soundbar, make sure that you have
completed all other connections (See "5.1 TV connection" in
the "5 CONNECT"chapter).
Auto standby
If the soundbar is inactive for more than 10 minutes, it will
switch to standby mode automatically. The subwoofer also
goes to standby, and the connection status indicator turns
slow flashing red.
Next time you switch on the soundbar, it returns to the last
selected source.
Auto wakeup
In standby mode, the soundbar will wake up automatically
when
the soundbar is connected to your TV through the HDMI
●
ARC connection and your TV is switched on;
the soundbar is connected to your TV through an optical
●
cable and audio signals are detected from the optical cable.
the subwoofer and the soundbar is less than 20 ft (6 m).
9 9
www.jbl.com